986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/index.php)
-   Boxster General Discussions (http://986forum.com/forums/forumdisplay.php?f=5)
-   -   Some juice (http://986forum.com/forums/showthread.php?t=74820)

rflores2323 03-19-2019 06:50 PM
Some juice
 
Got some juice. Ctek 3300. Any problem leaving top down while connected? https://uploads.tapatalk-cdn.com/201...47d50f5657.jpg

Sent from my ONEPLUS A6013 using Tapatalk

BrantyB 03-20-2019 05:42 AM
Can't imagine it would be an issue

mikefocke 03-20-2019 10:21 AM
Up or down doesn't matter. I always left my charger on the floor mat. Heat is not friendly to leather.

rfuerst911sc 03-20-2019 11:34 AM
If the cord is long enough I would place the charger outside the vehicle if possible . Just in case something happens with the charger and it overheats or worse catches fire . While the chances are remote you don't want to be that guy that say's " I wish I didn't leave it in the car " . I believe that the passenger side door weatherstripping has a small cutout from the factory for running the power cord through .

Ciao 03-20-2019 12:47 PM
Quote:
Originally Posted by rfuerst911sc (Post 591377)
If the cord is long enough I would place the charger outside the vehicle if possible . Just in case something happens with the charger and it overheats or worse catches fire . While the chances are remote you don't want to be that guy that say's " I wish I didn't leave it in the car " . I believe that the passenger side door weatherstripping has a small cutout from the factory for running the power cord through .
I run my "factory" charger keeping it outside; there is a cutout on the driver side weatherstip for running the wire through.


All times are GMT -8. The time now is 03:31 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website