Anyone know this kit or the Company
 

Does anyone know who makes this kit for the 986? Thanks in advance Andy http://986forum.com/forums/uploads02...1551728402.jpg

i don't *think* that is a kit - that looks like the precision chassis works race car that served as a test bed for their subaru engine conversion. his build thread is on this forum someplace (username kpaz).

the rear flares look like the american international racing (air) product. the roof is a standard spec boxster roof skin available from a number of vendors. the front clip is some second gen fenders and a bumper cover - available from a number of vendors but i suspect probably gt-racing in this case (mebbe getty or mashaw).

given you are in europe (for a while, anyway) perhaps save some shipping and have a look at dmoris, jacquemond, or club autosport too.

This 👇


https://m.ebay.com/itm/Porsche-986-Boxster-996-to-997-Update-Bumper-Spoilers-with-Lights-/180450787530?_mwBanner=1&_rdt=1

Thanks Guys, It was the wheel arches I was interested in. Couldn't tell if the fronts were extended or not from the pic but the rears look really nice

fronts look flared; probably these:

https://www.americaninternationalracing.com/product/a-i-r-front-fenders-1-wider-than-stock/

with this bumper:

https://www.americaninternationalracing.com/product/a-i-r-front-bunper-1-widers-than-stock/

this roof:

https://www.americaninternationalracing.com/product/lite-weight-roof/

and these flares:

https://www.americaninternationalracing.com/product/rear-flares-2/

The problem with conversions like this for a good street car, (depending on who does the work) is by the time you buy parts and get it all dialed, might as well just by a 987. And resale is horrible. Unless it’s a race car, then fit and finish are secondary concerns.

the car in question is not a 987/997 front end conversion. it is a conversion to the 996.2 headlights, but only because flared front fenders are not as readily available for early headlight cars.

Isnt Precision out of business?