Carfahrer,

Beautiful pieces, how much would you sell a set of these for?

Gilles,
Let me get them on the car in the next weeks to verify final fitment/instructions and I will message you.

Please note the LCA has a 14mm bolt for the upright connection which likely will require a little clearancing. This replaces the OEM 12mm stud which has a backcut on the threads and is a known weak failure point. A friend of mine tore up his 996 cup left front when this stud broke last year on his car.

Here are a couple of pics of the caster fork on the LCA.

https://i.ibb.co/5rgvzcs/6547-EA76-4...D86-C9-DA8.jpg

https://i.ibb.co/9ZFJj7G/072-F8866-7...-B7-B1-BB9.jpg

DOOOOOOOOD.......

So Beautiful!!!

(and don't think I don't know who you were tlaking about when you said you built a set for a friend who no longer needs them..... hahahaha)

However: Onethenaton; he NEEDS A SET OF THESE. He TOTALLY needs a set of these. :cheers:

It is what happens when it takes me two freaking years to finish them... :o

People can't wait around on me forever. Especially people as patient as you are.:p

At least some goodies from your car will find a good home on mine. Speaking of which when we meet up or I come down I need a ride in the 430 unless when you say 'putting it in storage for the winter' really means putting it in storage for the winter.;)

GT3 LCA Build
 

The lower control arms are finally on the car! YEESS!!!! Or should I say FINALLY!!

I have initially set up the fronts with 15mm shims and the rears with 10mm. I am very happy with how installation has gone so far.

A couple of pics.

Rear

https://i.ibb.co/1vJT0PH/AE34-EDE9-F...5-F94-D5-E.jpg

Front

https://i.ibb.co/JqtN3jL/2-EF57485-8...1-A626-BCE.jpg


I will detail install of the LCAs and other parts I have built in another thread for the comprehensive suspension build.

Looking good, really like that blue anodizing!