986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/index.php)
-   Boxster General Discussions (http://986forum.com/forums/forumdisplay.php?f=5)
-   -   Manual frunk release lever repair (http://986forum.com/forums/showthread.php?t=73105)

BrantyB 08-24-2018 01:42 PM

Manual frunk release lever repair
 
My friend has a 99 996 that has the manual trunk release (non-electric) but the pin holding the cable into the lever is gone. The eyelet of the cable is there so it looks like a simple repair. Has anyone tackled this sort of thing? I'm guessing remove the 3 rivets that hold the surround and disassemble?

911monty 08-24-2018 01:46 PM

Search results using your terms....

986 Forum - for Porsche Boxster & Cayman Owners - Search Results

BrantyB 08-27-2018 04:29 PM

That wasn't helpful. I've searched thoroughly and 99% are regarding manual release due to battery/electric failure.

Starter986 08-27-2018 05:02 PM

:rolleyes:
Quote:

Originally Posted by 911monty (Post 578044)

:rolleyes:

Pastor T 08-28-2018 04:29 PM

BrantyB; I just spend 2 days trying to get into my rear trunk. Both the manual cable and electronic cable had snapped within 2 months of each other. Before I could fix the electronic the manual broke. I guess 19 years and 150K miles have taken their toll. In any event remove the pin, get another and reassemble. Should be easy. However, if you want a challenge try doing it through a 2 inch opening in the trunk wall, in the dark.


All times are GMT -8. The time now is 07:35 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website