986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/index.php)
-   Boxster General Discussions (http://986forum.com/forums/forumdisplay.php?f=5)
-   -   Rubber air feeds to transmission (http://986forum.com/forums/showthread.php?t=72985)

DWBOX2000 08-09-2018 08:15 AM

Rubber air feeds to transmission
 
Not sure what they are called. There are two rubber pieces that attach to the suspension brace (aluminum triangle) that the two diaganol supports in the rear suspension attach to. I believe they help air flow up the tranny. I bought the rubber pieces and a plastic plug for each that just popped right into the hole in the rubber. Does anyone know if there is another connector piece that goes through the top? The plugs were small plastic hollow tubes (open on one end) with one side having a push end. The old one was one there for the 3 years and I never had any plugs to hold on so likely won't be an issue but I figure since I already went this far, I might as well do it right.

Thanks,

David

Stroked & Blown 08-09-2018 10:33 AM

This guy??https://www.pelicanparts.com/More_Info/98633136103.htm?pn=986-331-361-03-M100

If so there are male & female plastic T connectors that snap together to hold it in place, so it sounds like you are missing the male pieces.

Luckyman01 08-10-2018 08:37 AM

Mine are missing, are the T connectors available from pelican?

Luckyman01 08-10-2018 09:18 AM

Answering my on question

Also use (Qty.) (1) 999 507 774 40 retainer, (1) 999 507 775 40 retainer, for each air guide.


All times are GMT -8. The time now is 05:20 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website