![]() |
You're going to find the extra money for the wheel was well-spent when you compare it to the standard wheel that feels like it's plucked from a Chevy Cavalier.
|
Quote:
I'll take the triangle, thanks :) |
I'm reading some pretty strong opinions on the steering wheels. When I test drove both the base and the S (and the 997 coupe, back to back, in that order), both Boxsters had the base "triangle" wheel (I think the 997, too). Couldn't find anyting to complain about it both esthetically and functionally so an upgrade wouldn't have been on my list. The Box S I ended up getting (from inventory) ended up having the sport wheel (the one with thumb padding and a round center) and I am starting to appreciate it more each time I drive the car. It really feels very good in my hands and those thumb pads do help in involved driving with your hands locked in the 9-3 position.
On another note. Purely based on the test drive which was a perfect mix of straight driving and hilly twisties, I'd have still picked the Box S over the 997, even if the 997 sold at the same price to the Box S. Actually, after the 997 drive I was 100% sure that I was getting the Box S. I believe that a not too optioned Box S (and especially the 07 with the 3.4L engine), if you can keep it well under $60k, is the best bang for the buck out there in the sports cars category, bar none. So, jcoari, congrats again on making a very wise decision. :) |
thanks Super66 for the input, that sounds like my issue with the clutch, mostly from 1st to 2nd, sometime its jerky from 2nd to 3rd if clutch released too quickly, if anyone has a solution to this (will proper RPM match fix this?) , or can tell me its OK to release clutch this way, I will appreciate another experienced opinion...thanks
|
Quote:
I have to disagree here. I think a proper break-in period is essential to having a car which is more trouble-free in years to come. And, the break-in has as much to do with other systems in the car than just the engine. Proper wear patterns are established in the gears and CWP, sealed bearings have the opportunity to wear and distribute their lubrication throughout the bearings. The waterpump, alternator and PS pump establish wear patterns, the cooling system and engine get the chance to properly seal-up. Wheel bearings get worn in properly. Several mechanical parts get properly tempered, etc. All these things contribute to more trouble-free motoring down the road, so to speak... Happy Motoring!... Jim'99 |
Congratulations JOCARI you got a great set up. Don't sweat not getting 19" wheels or other options. I can assure you that many people who can afford more options end up with your set up because the certain amount of elegance in a clutter free set up. The car has a wonderful ride with 18"s and down the road additional options run the risk of more costly failures. It's all about the ride and man, oh man what a ride it is.
|
All times are GMT -8. The time now is 11:43 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website