986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/index.php)
-   Boxster General Discussions (http://986forum.com/forums/forumdisplay.php?f=5)
-   -   Wheel bearing replacement (http://986forum.com/forums/showthread.php?t=72020)

azlvr 05-03-2018 05:38 AM
Wheel bearing replacement
 
Well just finished my rear wheel bearing replacement, it went pretty good. I used the OTC Grappler puller and a generic wheel bearing puller set from Amazon that was recommended for $125 & $70. The Grappler puller was fantastic and NO brake shoe removal needed.

steved0x 05-03-2018 08:17 AM
Quote:
Originally Posted by azlvr (Post 569389)
Well just finished my rear wheel bearing replacement, it went pretty good. I used the OTC Grappler puller and a generic wheel bearing puller set from Amazon that was recommended for $125 & $70. The Grappler puller was fantastic and NO brake shoe removal needed.
Nice, I think you might be the first, and it is good to confirm it! :cheers:

rocartfe2 05-08-2018 05:51 PM
I just did the same thing. I had the transmission out and replaced both rear bearings. It was so much easier than removing the hubs and using a press.


All times are GMT -8. The time now is 02:53 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website