986 Temp Sensor; Right Front Radiator Grill
I just removed the bumper on my 986 and cleaned the radiators. The temp sensor which fits into a hole on the right front radiator grill on the bumper, is there a clip to hold this in place? It seems to just fit into the hole and does not appear to be too secure. I put some permatex in the hole and then plugged the sensor into the grill to keep it in place a bit better. Thank you
|
I'm pretty sure when I pulled my bumper cover off to clean the radiators that sensor was just pressed into the right side grill. No clip - it just kind of snapped in. If I remember correctly it also was loose in the socket after it was snapped into place. (there was some play in it).
|
the sensor should have a lip in the plastic/rubber that should pop it into the hole. If the sensor has come out several times, the clearance might be a bit loose. I think your plan will be fine.
|
All times are GMT -8. The time now is 11:13 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website