Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 04-02-2012, 10:49 AM   #1
2001 RUF 3800S
 
violametallic-S-'s Avatar
 
Join Date: Mar 2009
Location: Ontario, Canada
Posts: 326
After I jacked my car on stands, oil started to leak...

Before storing my car for the winter i experienced oil in my coolant. After doing research I bought a new oil cooler and seals. My plan was to start on it today but I jacked the car up and oil started to leak.

It dripped for about 10min and pretty much stopped, after putting it back down it didnt leak again. The first picture shows the small puddle after 15 min of being lifted.

In the second picture, it shows where its leaking from, obviously its leaking on the skid plate and rolling down from somewhere but where? Also it was a action shot of the oil drip, its not pouring out or anything.

Oil gauge reads half oil which makes sense because thats what it was left at before winter. And there are no other oil spots on the floor from the winter.

I understand it could be the rms or hopefully something less hectic, but why is it leaking while being lifted?






__________________
IG: RUF3800S
violametallic-S- is offline   Reply With Quote
Old 04-02-2012, 10:58 AM   #2
Ex Esso kid
 
Join Date: Dec 2005
Location: NY
Posts: 1,605
Just a guess but it might be leaking when lifted because there is a pool of oil in that pan it's dripping from that is changing position when the car is lifted. FYI, oil & coolant can also mean a failure of a head gasket.
Ghostrider 310 is offline   Reply With Quote
Old 04-02-2012, 11:27 AM   #3
Registered User
 
jaykay's Avatar
 
Join Date: Sep 2009
Location: toronto
Posts: 2,668
+1

Collection of fluid on top of the plate
__________________
986 00S
jaykay is offline   Reply With Quote
Old 04-02-2012, 12:31 PM   #4
Certified Boxster Addict
 
Join Date: Nov 2010
Location: Los Angeles
Posts: 7,669
You'll have to drop the pan to see where the oil is coming from. Be careful, there is likely to be more oil on top of the pan waiting to spill onto whatever you don't want oily.
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
thstone is offline   Reply With Quote
Old 04-02-2012, 05:46 PM   #5
2001 RUF 3800S
 
violametallic-S-'s Avatar
 
Join Date: Mar 2009
Location: Ontario, Canada
Posts: 326
It's clean oil that dripped, compared to the oil on the dip stick which was darker.
It's impossible to spill while refilling..
__________________
IG: RUF3800S
violametallic-S- is offline   Reply With Quote
Old 04-03-2012, 02:26 AM   #6
Registered User
 
Join Date: Jun 2007
Location: Colchester, CT
Posts: 489
Quote:
Originally Posted by violametallic-S- View Post
It's clean oil that dripped, compared to the oil on the dip stick which was darker.
It's impossible to spill while refilling..
...unless he has a cracked filler tube perhaps.
__________________
1999 986 2.5L, Stock Exhaust (S muffler), EVO Intake, 18" Stock rims (17" during winter), IMS Upgrade, 150k+ miles and counting!
87 944S brought back to life
Dragonwind is offline   Reply With Quote
Old 04-03-2012, 05:22 AM   #7
Schatten-Baum-Mechaniker
 
Join Date: Mar 2005
Location: Mississippi
Posts: 242
Where are the bolts that should be holding the pan on that end?

That's a structural part of the suspension.
__________________
Tommy
2000 Boxster S
1973 914
tommy986 is offline   Reply With Quote
Old 04-03-2012, 04:11 PM   #8
Registered User
 
Idaho Red Rocket 3's Avatar
 
Join Date: Oct 2010
Location: Nampa, ID.
Posts: 488
Is it motor oil or transmission gear lube ?
__________________
2000 Boxster S
And then there are the Motorcycles.
Idaho Red Rocket 3 is offline   Reply With Quote
Old 04-03-2012, 05:03 PM   #9
Ex Esso kid
 
Join Date: Dec 2005
Location: NY
Posts: 1,605
Quote:
Originally Posted by tommy986 View Post
Where are the bolts that should be holding the pan on that end?

That's a structural part of the suspension.
mile marker 46
Ghostrider 310 is offline   Reply With Quote
Old 04-03-2012, 06:35 PM   #10
Autobahn Glanz
 
WhipE350's Avatar
 
Join Date: Dec 2010
Location: Charlotte, NC
Posts: 1,282
Garage
+1 Where are the missing bolts? The chassis reinforcement plate is attached to the rear axle support by two bolts and torqued to about 48lb. Also I would agree the oil came off the reinforcement plate. Look at the oil closely and smell it. Transmission fluid smells nasty compare to engine oil. Normally engine oil leaks occur forward of the rear axle support unless your oil filler tube is leaking where it attaches to the filler (mine was).
Look closely for signs of oil where the transmission meets the engine, this is where RMS leaks would show but generally that oil would not land on the reinforcement plate.
Good luck!
WhipE350 is offline   Reply With Quote
Old 04-05-2012, 04:52 PM   #11
Multi-Boxer Driver
 
Deserion's Avatar
 
Join Date: Nov 2010
Location: Orange Park, FL
Posts: 1,406
Garage
Well crap, mine doesn't have that plate on it...
__________________
-Chris
2004 Porsche Boxster 2.7
1991 Porsche 911 C2 Targa 3.6
2017 Subaru Outback 3.6R
Deserion is offline   Reply With Quote
Old 04-06-2012, 01:26 AM   #12
Registered User
 
Steve Tinker's Avatar
 
Join Date: Dec 2008
Location: Queensland, Australia
Posts: 1,522
Then you have a serious handling / structural problem......
You are not supposed to even drive the car without it being attached / unbolted to the chassis structure.
__________________
2001 Boxster S (triple black). Sleeping easier with LN Engineering/Flat 6 IMS upgrade, low temp thermostat & underspeed pulley.
2001 MV Agusta F4.
Steve Tinker is offline   Reply With Quote
Old 04-06-2012, 07:48 AM   #13
Registered User
 
Join Date: May 2008
Location: Toronto
Posts: 2,656
Where are the missing bolts? Photo look very unsettling like an unsolved murder mystery.
ekam is offline   Reply With Quote
Old 04-06-2012, 10:17 PM   #14
Multi-Boxer Driver
 
Deserion's Avatar
 
Join Date: Nov 2010
Location: Orange Park, FL
Posts: 1,406
Garage
Quote:
Originally Posted by Steve Tinker View Post
Then you have a serious handling / structural problem......
You are not supposed to even drive the car without it being attached / unbolted to the chassis structure.
Well crap. This is what happens when I don't pay attention. I was thinking the pan was closer towards the front, but it turns out my Box has it there where it should be. And to think I've seen it there prior... guess I'm losing my memory.
__________________
-Chris
2004 Porsche Boxster 2.7
1991 Porsche 911 C2 Targa 3.6
2017 Subaru Outback 3.6R
Deserion is offline   Reply With Quote
Old 07-26-2020, 12:36 PM   #15
Registered User
 
Join Date: Dec 2015
Location: Montréal
Posts: 7
Garage
Today i replaced both rear LCA’s on my 2001 986 S and same as you, while lifting the car very high i saw oil starting to spill on the ground... i quickly noticed that it came from the drive axle seal with the transmission...

My thought is that on some extreme jacking conditions (like lifting one side at the maximum of my jack to put a jack stand under the car), the seal of the driveshaft seemed to allow transmission oil to come out, then fill the pan that you are talking about to finally leak on the ground.

After putting the car back on the ground, the leaking seemed to stop, so my guess is that we need to avoid lifting too much on one side when the other side of the car is still on the ground

I lost around 2 cups of that oil and i think i will have it refilled to make sure that my tranny is safe, i will keep you guys updated in a few days after going for my alignment and transmission oil refilled.

lucoche is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 09:35 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page