986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/index.php)
-   Boxster General Discussions (http://986forum.com/forums/forumdisplay.php?f=5)
-   -   Speaker wire connectors (http://986forum.com/forums/showthread.php?t=61221)

jeeper31 04-13-2016 10:24 AM

Speaker wire connectors
 
Hooking up rear speakers in my 98 Boxster I am wondering if I can use these connectors so I'll be able to remove the speakers to get to the engine.

Please follow link and let me know.

Thanks

Shop Reese Towpower Professional Series 4-Wire LED Trailer End Circuit Tester at Lowe's

Burg Boxster 04-13-2016 11:26 AM

Sure, you could but then you'll likely end up w/ a plug connection and two splices b/w amp and speakers. A better and cheaper solution would be to hit a radio shack and get a 4 position plug w/ connectors so you can cut wires to length as needed and not splice in a connector. such as:

https://www.radioshack.com/products/radioshack-4-position-female-polarized-connector?variant=5717408965

https://www.radioshack.com/collections/maker-parts-kits/products/radioshack-4-position-male-polarized-connector?variant=5717407365

Good luck :)

Pdwight 04-13-2016 02:27 PM

Much Better
 
That 4 conductor Molex is the way I went. I ran a new 6 conductor cable from my head unit to the rear, 4 wires for speakers and two additional wires for whatever future use


All times are GMT -8. The time now is 06:04 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website