Issues after Cruise Control and OBC mod.
I have a 2000 Boxster S that I just modded for cruise and OBC. Those two function work great.
I added a 4 stalk thingy and and replaced the the spring thingy between the column and wheel (technical term of course!) Now I have an airbag light and no blinkers. Any thoughts? Does the air bag need to be reset in the computer once disconnected? I suspect the spring thingy may be bad if not... It is a new blinker switch so I am not sure whats going on there. Before I tear it all apart, I just thought I would ask if anyone has idea. Thanks. |
the airbag light could be if you connected the battery while the airbag was disconnected. the cure for that is to reset the airbag light with a Durametric or Porsche tool. sux if you dont have a friend with one as the dealer or Porsche specialist will charge you an hour labor for what literally takes them 5 minutes.
|
Ok, I have solved the blinkers, it was the hazard switch. I had a spare.
I did indeed plug and unplug the battery without the airbag plugged in. I do have a Durametric Pro so resetting the air bag should no problem! Thanks so much, this forum has been very useful! |
Air bag reset, blinkers work.. got cruise control and on board computer... life is good.
|
How much did this modification cost you. Cruise control.
|
If you throw in the Durametric, bad hazard switch, 4 stack switch etc it was about $1200.00
The Durametric pro was about $850.00 but well worth it. I did the work myself so there was no labor. I took it for a night run down the california coast last night and the cruise control really helped keep it as reasonable speed. I also got about 21 mpg. If it saves one or two tickets it pays for itself! |
All times are GMT -8. The time now is 09:53 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website