$6 Fix for Plastic Window
How I wish I'd taken a "before" picture, so you could see How awful my rear window was! it say it was milky white like a frosted window, and heavily pitted and stained. Before I spent a lot of money on new plastic or full glass top, I thought I'd try some headlight polish I had.
FYI, this took a LOT of elbow grease, and is a SLOW process. I'm actually still working on it after several days of labor. I've buffed the window countless times and invested maybe as much as 12 hours bent over the rear window. But look at the results, for only a $6 bottle of plastic polish! http://i257.photobucket.com/albums/h...ps5f28a404.jpg http://i257.photobucket.com/albums/h...ps70e35477.jpg http://i257.photobucket.com/albums/h...pse19b6721.jpg http://i257.photobucket.com/albums/h...psa42c3c0f.jpg |
I too use head light restorer polishing compound to clean up rub areas on my plastic window
Works great My window is in great shape but extended down time does chafe it a bit |
12 hours is a lot of elbow grease. Now that it's looking good you will have to do a quick polish every few months to keep it looking decent. Once the window has gotten to this point even after a good cleaning it tends to oxidize pretty quickly.
|
Quote:
|
Quote:
|
Once polished out, keep it protected with Plexus. The rear window on my 2002 looks like new, other than a couple minor scratches.
http://986forum.com/forums/uploads01...1423275626.jpg |
|
Another good product
210 Plastic cleaner & polish from Sumner Labs. Inc. Sumner Laboratories Inc - Home Cleared my plastic window up nicely. Biggest trick is squeezing between the seats and reaching around the roll bars while the top is up in order to polish the inside. A lot needs to be cleared on the inside as well as the outside so do not neglect that part. Being short is a boon while doing this job. I have done a few windows for other PCA members at our Spring Breakout event in May.
I imagine an orbital polisher with soft foam pad would work nicely but I did all my work by hand and it didn't take all that long. AKL:cheers: |
I took a look at their website but they sell (12) 7oz cans to a case with a 3 case minimum order. So I checked out ebay and they have a single 14oz can for $15, but it's from Camco. Label looks the same but I've been fooled from knock offs. Does your can say Camco anywhere on the label?
Quote:
|
Quote:
My wife bought a can along with some other things for her art supplies. Used for plexiglas polishing and I gave it a try on the Boxster window where I found it works fine. Keep us posted on your effort. AKL |
Can someone share the Plexus product link that someone mentioned above?
Can I buy the Plexus product at local store? |
Quote:
It would not pass inspection here. For 12 hours of labor, I would just replace the top. |
Plexus works well, but its very expensive (12 bucks for a small can). You can find it at most motorcycle shops.
|
All times are GMT -8. The time now is 07:26 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website