986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/index.php)
-   Boxster General Discussions (http://986forum.com/forums/forumdisplay.php?f=5)
-   -   Fender Bender Hit and Run - Repair Opinions? (http://986forum.com/forums/showthread.php?t=54392)

rick3000 10-09-2014 04:11 PM

Fender Bender Hit and Run - Repair Opinions?
 
Hi Everyone,

This past Saturday, my 986 was involved in a hit and run fender bender. Some jerk backed into my drivers side front fender and did not leave a note. Even more bizarre, I was parked next to the handicap/no parking area directly in front of a store nose-first, and in the only spot not covered by cameras.

Because of all this I am on the hook for the repair, or at least my $1k deductible. I have some scraping/scratching and a sizable 4" x 4" dent. I am currently in the process of getting estimates, from a few shops. The first one was $920, to hammer the dent out and respray most of the front end.

Any thoughts on what to look out for, or things to make sure the body shop does or doesn't do? Do you think painless dent removal could be an option along with some serious buffing?

You can see the damage below. I am going to attempt to buff out the scrapes on Saturday.

Thanks for any tips/advice!

On the upside, at least now I have an excuse to get matching clear side markers.

http://986forum.com/forums/uploads01...1412899038.jpg

rick3000 10-10-2014 10:44 AM

Second estimate came in at $785, from the shop my insurance recommended. Although I think I could get them down to $600. They included things like a half hour of labor to remove the headlight, which is ridiculous. I am going to get some paintless dent removal quotes next.

Any opinions on whether painless dent removal could be an option here? Thanks!

Porsche9 10-10-2014 11:03 AM

Quote:

Originally Posted by rick3000 (Post 421220)
Second estimate came in at $785, from the shop my insurance recommended. Although I think I could get them down to $600. They included things like a half hour of labor to remove the headlight, which is ridiculous. I am going to get some paintless dent removal quotes next.

Any opinions on whether painless dent removal could be an option here? Thanks!

Definitely try paintless dent removal. The factory paint is going to be better then a respray. If you can find someone that knows what they are doing they can do some pretty amazing work. Good luck.

RandallNeighbour 10-10-2014 11:27 AM

I agree with Porsche9... try PDR. Shop for a guy or gal who's been doing it for 10+ years and they'll massage that sucker out and you won't even be able to tell it happened....

... provided the paint didn't crack. If it did you're screwed.

BoxsterSteve 10-10-2014 02:35 PM

+1 on the PDR.
I had a pea sized ding on the passenger door, a fairly large, but shallow dent in the clamshell; probably Speedster Hump related, and a monster of a door dent on our Odyssey repaired by a fella who does PDR all day at the nearby Toyota assembly plant. Quality work, reasonably priced ($140 for everything), and in-the-driveway service to boot.
Any small paintwork scratches you have left can be minimized by careful touch-up, wet sand & polishing. It's amazing what a good D/A polisher can accomplish.

rick3000 10-10-2014 02:45 PM

Thanks for the recommendations, I think I am going to try the PDR first, or at least get some estimates. I have already received one via email by sending them a picture, and they quoted me $250.

Randall, is there anyway I can tell if the paint is cracked? There does not appear to be any visible cracking of the paint in or around the dented area.

BoxsterSteve 10-10-2014 03:01 PM

Rick, if the paint hasn't split from the impact, you're probably OK. You'd know; it would look like a cracked egg shell, maybe even with paint chips missing.

rick3000 10-11-2014 08:38 AM

Thank you to everyone for your input/advice! :cheers:

I am waiting for a few PDR people to get back to me with estimates (all of which have many years of experience), however I managed to clay bar/buff/polish out most of the scuffing. There is still a small line of scuffs along the crease of the wheel arch, with a slightly larger scuff directly below the dent.

The dent is relatively shallow (less than 1/2"), and there is very easy access to the back of the panel via the wheel well. I am hoping a good PDR guy can get it looking like new.

There was no damage to the rim, but I am going to have the rim, hub, and alignment checked when I replace my tires in the next month or two.

http://986forum.com/forums/uploads01...1413045392.jpg

http://986forum.com/forums/uploads01...1413045403.jpg

rick3000 10-14-2014 11:48 AM

The painless dent removal guy just finished, it ended up taking about an hour and cost $225. One very small scuff just above the light, and besides that no indication the dent ever existed. Kept the original lacquer and avoided any bondo.

Thank you to everyone that provided input! :cheers:

http://986forum.com/forums/uploads01...1413316107.jpg

JayG 10-14-2014 12:13 PM

looks great!

schnellman 10-14-2014 03:54 PM

Thanks for the update. She looks beautiful.

tuanle16 10-15-2014 08:47 AM

wow. excellent work

BoxsterSteve 10-15-2014 11:36 AM

Almost like it never happened. Sure beats Bondo and a repaint!

rick3000 10-15-2014 12:47 PM

Quote:

Originally Posted by BoxsterSteve (Post 421754)
Almost like it never happened. Sure beats Bondo and a repaint!

I agree, and saving $600+ doesn't hurt either. :cheers:

Porsche9 10-15-2014 01:36 PM

Glad that worked out! Having to repaint sucks.


All times are GMT -8. The time now is 09:36 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website