Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 07-19-2014, 08:48 PM   #1
Registered User
 
virgosunleomoon's Avatar
 
Join Date: Jul 2014
Location: Syracuse, NY
Posts: 14
Garage
Quote:
Originally Posted by particlewave View Post
Keep in mind that there are 2 potentiometers for the e-gas for redundancy. When 1 fails, RPMs are limited by the ECU exactly as you describe.
Sorry if it's been said before.
ok, where are those 2 "potentiometers"?

I replaced the fuel pump and sending unit.
I replaced the fuel filter.
I have a new fuel pump relay that didn't make a change.

My throttle body is apart in my hands right now, will put it back together clean and see what happens. not too much oil in there, seems to be ok. i will post later.

PS - the fancy fuel pressure hose I bought from the dealership, it has a metric end and I cant screw it onto the gauge I have. -grrr-
virgosunleomoon is offline   Reply With Quote
Old 07-19-2014, 08:53 PM   #2
Registered User
 
virgosunleomoon's Avatar
 
Join Date: Jul 2014
Location: Syracuse, NY
Posts: 14
Garage
and Paul, good point on the connection for the throttle body, I will make sure its tight when it goes back in.

PS - AND WE STILL HAVE P1502 for a CEL.... (Throttle Body not put back together yet...)
virgosunleomoon is offline   Reply With Quote
Old 07-20-2014, 12:44 AM   #3
Registered User
 
virgosunleomoon's Avatar
 
Join Date: Jul 2014
Location: Syracuse, NY
Posts: 14
Garage
PROBLEM SOLVED - In the end, it was the P1502 code that was the problem and the cure. My new Can-Tech OBD II tool showed the P1502 code and below it it said "Fuel Pump Relay End Limit. Porsche Part $11" Seeing this I assumed it was a Fuel Pump Relay code. After changing the fuel pump/sending unit/fuel filter and trying out my new fuel pump relay, I was discouraged so I texted my buddy who is the head mechanic at the Porsche dealership (yeah, tried to do it without him) and he said 1502 was a throttle body error code. Not happy hearing this, I opened my Bentley Service Manual and looked it up.

P1502 - Throttle Jacking Unit Spring Test

I almost crapped my pants. Why the hell did the OBD reader say "Fuel Pump Relay?" I couldn't believe it. I took the TB apart, cleaned it real good, exercised it, put it all back together, and started it up. Very rough idle but I could get it to 2300rpms!! On the right track I said! So I did the EGAS remapping thing where you turn the key to on for a minute and then off for ten seconds and start it. same thing. Then I cleared the code with the OBD reader and started it up.

OMG, it was like a new car. Not only did I have my revs back but after the car got to temperature, there was no flutter in the idle. I was so happy, I took it out and set a personal record for fastest speed on four wheels. 145mph

The throttle body wasn't really THAT dirty so I think I am just going to order a new one and throw it in there so I don't have any issues in the future.

I want to thank everyone who contributed to the effort in getting my baby back to normal. Got 3 days at Watkins Glen August 22nd, 23rd, and 24th. I was starting to sweat a little. -wink-
virgosunleomoon is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 06:29 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page