Replace that nasty mushroom shifter!

[djomlas]

and if you have one like we pictured, the allen screw is facing the radio/front of the car

[bagwell]

i have the exact same one as randall....I believe its the knob off an 02~up.....
plastic painted silver.

how far up is the screw on the front of the shifter?



thanks again for the help!

[Boxtaboy]

Originally Posted by bagwell

i have the exact same one as randall....I believe its the knob off an 02~up.....
plastic painted silver.

how far up is the screw on the front of the shifter?



thanks again for the help!

On that shift knob, there is no set screw. You just pull it off. Put it in 2nd gear, and yank hard towards you. It will just pop off.

After market knobs look cooler, lol. Besides, I can lower mine a whole lot

[bagwell]

Originally Posted by Boxtaboy

On that shift knob, there is no set screw. You just pull it off. Put it in 2nd gear, and yank hard towards you. It will just pop off.

gracias!!!

I'll try to warm it up a bit too and see if it comes free.

[djomlas]

i sold a really nice ichibahn shift knob, did not fit on the box. was so pissed.

but i like this one sooo much that its all good

Ya, I had to grind away at the stick, but its all good because I can set it as low as I want since I cut the stick lower too.

[djomlas]

so can u still put the original knob on there?

btw, this is what i have done with mine, just a little more action than stock and dirt inside the numbers