Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 11-14-2006, 01:08 PM   #1
Registered User
 
Join Date: Jul 2006
Location: Where the Sewer Meets the Sea, CA. USA
Posts: 2,695
Send a message via MSN to CJ_Boxster
Quote:
Originally Posted by jeffsquire
______________________
have you got a picture of this? HOw much and where?
No picture yet, I havent installed it yet, It cost me about 60 bucks and 15 for shipping, I forgot what part of the UK but i called a used and new porsche parts place called Porsche Apart. When the cheap get searching, the Cheap get the deals.
__________________
--Proud Boxster Owner/Tech,

Carlos J Cazares

FastForward Performance
http://i10.photobucket.com/albums/a1...er/newsig1.jpg
CJ_Boxster is offline   Reply With Quote
Old 11-14-2006, 01:21 PM   #2
Registered User
 
Join Date: Sep 2006
Location: chicago
Posts: 3,510
Send a message via AIM to djomlas
mine just has one allen screw holding it
__________________
http://i34.tinypic.com/157yslk.jpg
"I couldn't find the sports car of my dreams, so I built it myself." ~F. Porsche
Gemballa springs::litronics::Eurotech 18s(275/225)::B&M::MOMO wheel::
exhaust cutouts::EVOcoldair intake::OEM smoked tails & sidemarkers::

colormatched bumperettes::Top Speed Pro-1 exhaust::
my cardomain/pictures page
djomlas is offline   Reply With Quote
Old 11-14-2006, 02:25 PM   #3
Registered User
 
Join Date: Jul 2006
Location: Where the Sewer Meets the Sea, CA. USA
Posts: 2,695
Send a message via MSN to CJ_Boxster
The mushroom non-optional shift knob that comes stock in my boxster just slides off and the new one i just installed slides on then i have a allen bolt to tighten... incase anyone is interested as to why theres an allen bolt, It is cause the shift knob is Height adjustible.

If you slide it all the way down you and tighten the allen bolt, you will notice your shifter leather boot is pretty baggy, its cause you are at the lowest setting for height.

I just installed it an hr ago, heres a picture VVV.
__________________
--Proud Boxster Owner/Tech,

Carlos J Cazares

FastForward Performance
http://i10.photobucket.com/albums/a1...er/newsig1.jpg
CJ_Boxster is offline   Reply With Quote
Old 11-14-2006, 02:47 PM   #4
Registered User
 
Join Date: Sep 2006
Location: chicago
Posts: 3,510
Send a message via AIM to djomlas
o tahts the one ure talking about...

ive got the same one, i swear its the most comfortable knob ever.
__________________
http://i34.tinypic.com/157yslk.jpg
"I couldn't find the sports car of my dreams, so I built it myself." ~F. Porsche
Gemballa springs::litronics::Eurotech 18s(275/225)::B&M::MOMO wheel::
exhaust cutouts::EVOcoldair intake::OEM smoked tails & sidemarkers::

colormatched bumperettes::Top Speed Pro-1 exhaust::
my cardomain/pictures page
djomlas is offline   Reply With Quote
Old 11-14-2006, 02:52 PM   #5
Registered User
 
Join Date: Jul 2006
Location: Where the Sewer Meets the Sea, CA. USA
Posts: 2,695
Send a message via MSN to CJ_Boxster
Yeah i really like it, Im just starting to get use to the lower height, I might raise it abit higher so that the leather boot doesnt look so baggy and jumbled.

Right now from that picture you showed me, i can tell your knob is at the lowest setting.
__________________
--Proud Boxster Owner/Tech,

Carlos J Cazares

FastForward Performance
http://i10.photobucket.com/albums/a1...er/newsig1.jpg
CJ_Boxster is offline   Reply With Quote
Old 11-14-2006, 03:53 PM   #6
Registered User
 
Join Date: Sep 2006
Location: chicago
Posts: 3,510
Send a message via AIM to djomlas
yup, lowest one. i wish it can go lower too
__________________
http://i34.tinypic.com/157yslk.jpg
"I couldn't find the sports car of my dreams, so I built it myself." ~F. Porsche
Gemballa springs::litronics::Eurotech 18s(275/225)::B&M::MOMO wheel::
exhaust cutouts::EVOcoldair intake::OEM smoked tails & sidemarkers::

colormatched bumperettes::Top Speed Pro-1 exhaust::
my cardomain/pictures page
djomlas is offline   Reply With Quote
Old 11-14-2006, 04:23 PM   #7
Registered User
 
Join Date: Jul 2006
Location: Where the Sewer Meets the Sea, CA. USA
Posts: 2,695
Send a message via MSN to CJ_Boxster
i just raised it about half an inch, boot looks slightly better... if i dont like the way the distance i have to reach to put it in 5th gear, then ill lower it back down.
__________________
--Proud Boxster Owner/Tech,

Carlos J Cazares

FastForward Performance
http://i10.photobucket.com/albums/a1...er/newsig1.jpg
CJ_Boxster is offline   Reply With Quote
Old 11-14-2006, 04:26 PM   #8
07 Carrera S Cab
 
Boxtaboy's Avatar
 
Join Date: Nov 2005
Location: New Jersey
Posts: 2,273
Garage
There are 2 styles of OEM shift knobs-

The ones that just pull off with force are the standard knobs. These included the older/early model mushroom like knobs, and the newer ergonomic knobs that look like they have aluminum on it, but they're actually painted sections. The upgraded knobs are made of real aluminum and leather, and they look like the ones posted here with a ball shaped knob with half of the ball in aluminum. That's the one I have too. These are much more solid/heavy and substantial in feel, and also have the advantage of never scratching off as the painted parts on the standard knob does.

Finally, there is a third knob style that is made for the S models that is also ergonomic, and has a real aluminum slab on the knob. All the upgraded knobs have a set screw to allow for height adjustment.
__________________
Current: 07 Carrera S Cab in Midnight Blue

Previous: 01 Boxster in Arctic Silver, 86 944 in Guards Red
Boxtaboy is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 02:15 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page