1/4 Mile Times

[nastyboxster]

I have the Gtech and ran 0-60 times, but I can't find a road long and safe enough to test 1/4 times. I plan to add some mods to the car and that's why I'm measuring the times. So far, I have the air intake and short shifter. I made 5-6 runs and my best time was 5.48, avg about 5.7. I can only achieve the results if I shift at close to/at redline. I plan to do the superchip or GIAC and the 2nd cat bypass. My goal is to get close to 280hp and cut 1/2 second off 0-60. This would be at par with a 3.4 996.

Total cost for the chip and bypass $1500.

[cheetah]

13.5 @ 106 was done last week at the track (with a 1.9 60' and missing the shift to 3rd gear the first attempt).

I am running through the data logging and I estimate that delay cost 3/10's, so a low 13 second run will probably happen next time out.

As driven to the track, not even tire pressure changes or a burnout. Full weight car with the 3.4L.

[mountainman]

in western north carolina the average quarter mile has about 20 hairpin turns so our top speed is around 60. However, the boxster does it better than most.

[BYprodriver]

Originally Posted by cheetah

13.5 @ 106 was done last week at the track (with a 1.9 60' and missing the shift to 3rd gear the first attempt).

I am running through the data logging and I estimate that delay cost 3/10's, so a low 13 second run will probably happen next time out.

As driven to the track, not even tire pressure changes or a burnout. Full weight car with the 3.4L.

1.9 to 60ft is pretty good!