986 Forum - The Community for Porsche Boxster & Cayman Owners - Rear Upper Control Arms, replace or fix?

Page 2 of 2

Show 40 post(s) from this thread on one page

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/index.php)

- Boxster General Discussions (http://986forum.com/forums/forumdisplay.php?f=5)

- - Rear Upper Control Arms, replace or fix? (http://986forum.com/forums/showthread.php?t=34506)

Bala	04-18-2012 02:39 AM

Quote:

Originally Posted by ronlatta (Post 286908)

Thanks. Also, the part numbers they gave me for the track rods are 996-34104306 and 986-33404307. Two each.

Check the part number on your part and check their website for a match. I didnt but they shipped me the correct ones.

ronlatta

04-20-2012 11:03 AM

Great info, thanks so much!

BiggieSmalls

07-31-2016 05:21 PM

any good or bad experiences with Vertex Auto?

Bala	08-01-2016 01:48 AM

Good experience.

RandallNeighbour

08-01-2016 04:07 PM

Ditto to what the poster above said...

FauxDiablo

08-02-2016 05:04 AM

Quote:

Originally Posted by bmx672 (Post 283667)

I wonder if a visual inspection of all the components would be enough to tell.

No. Not unless your car suffered severe collision damage.

You need to get the suspension up in the air, and literally start pushing and pulling on parts, sometimes with a crowbar, to see if they are moving too freely.

All times are GMT -8. The time now is 04:00 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website