|
Boxster S Hard to shift into gears
My 2000 Boxster S is hard to shift into all gears when the car is running. I've changed the motor mount and slave cylinder and I still can't find the problem. Does anyone know what could be the problem?
|
When was the last time the transmission fluid was changed?
|
How's the clutch pedal working? How far is the friction point from the floor? Have you checked the fluid level in the tranny?
|
Or the fluid level in the brake / clutch resevoir, as air could be in the system ????
|
Many things, as stated above, can cause the trouble. Why are you throwing money at a problem without a proper diagnosis? Take it to someone and find out if it's your fluid, synchros or......???
|
Not sure but could a bent shifter fork cause this kind of a problem?
|
Thanks a lot for the info. I had the car for a year now and the trans fluid is the only thing I haven't checked.
|
Try R.O.C.S. in Belleville on Washington Ave. They'll have it diagnosed quickly.
|
If it shifts fine with the motor off, it's probably the clutch going....
My $0.02 -CKKrause |
Is it all the gears or just 1st 2nd and reverse?
|
how about checking the adjustment of the two shifter cables?
That's where I would start |
Will not shift into reverse
Just wanted to thank you guys. My boxster wouldn't shift into reverse, and after reading the thread I was able to remedy the problem, I used the zip ties. Works fine now. Thank you.
Sid |
| All times are GMT -8. The time now is 01:39 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website