Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 01-10-2012, 04:36 PM   #1
Autobahn Glanz
 
WhipE350's Avatar
 
Join Date: Dec 2010
Location: Charlotte, NC
Posts: 1,282
Garage
Quote:
Originally Posted by DenverSteve View Post
It's really more about how much tread is left in the remaining tires. For me if over half the tread-life remains, I would probably just do one and see how it handles. Did you buy them new? If so, did you purchase road-hazard insurance? If so, that may help soften the blow.
+1

Also check the rim, these guys bend easier then you would expect. Of course when you get the new tire they will tell you while balancing it if it is bent. The inside of rims bend when hitting things and you don't feel it until driving around 70. It happened to me on my previous Benz and I had it fixed by a mobile rim straightening company.
WhipE350 is offline   Reply With Quote
Old 01-11-2012, 09:36 AM   #2
Registered User
 
BYprodriver's Avatar
 
Join Date: Oct 2008
Location: O.C. CA
Posts: 3,709
Garage
Quote:
Originally Posted by WhipE350 View Post
+1

Also check the rim, these guys bend easier then you would expect. Of course when you get the new tire they will tell you while balancing it if it is bent. The inside of rims bend when hitting things and you don't feel it until driving around 70. It happened to me on my previous Benz and I had it fixed by a mobile rim straightening company.
Make sure they first "balance" the bare wheel to see how imperfect it is. If it calls for more than 1.5oz to balance you will need to use the following procedure to minimize vibration: The cause of vibration is that the tire and the wheel assembly isn't exactly round. When the high spots on the tire and the wheel match to each other, it doubles the amount of runout , or "hop." If there is a hop the vibration will not end when you rebalance your tires. A hop can often be fixed by simply loosening the tire on the wheel and turning it 180 degrees, reinflating the tire after relubricating the bead. If the problem persists, rotate the tire another 90 degrees, and again 180 degrees if there is still vibration. Doing this allows for the high spot to be tried at each quarter of the wheel, and at one of the points, the tire should be round. From here, rebalance the tire and test drive to check for remaining vibration. If you still feel it, the problem is either in the tire itself of elsewhere in the vehicle.
BYprodriver is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 10:52 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page