Caliper painting

[The dude]

I have the red "S" brakes on the boxster. The red seems to be holding up well, but the clear coat is peeling in some areas. I plan on pulling the calipers off and fixing the clear. I asked the local part shop what to use..... I have some PGP Deltron 4000 clear, but that is for the body and I wasn't sure how that would hold up. He told me to use the clear in a spray can that was labeled for wheels. I have a bad feeling about this..... but, the parts guy says to trust him.

Has anyone freshened up the clear on the calipers.... and if so, what did you use? What did you use to touch up the red?

[kpm]

The PPG is only good to about 350 degrees. Your caliper will get much hotter than that, so the parts guy is right.

I think VHT makes a brake caliper clear in a spray can...they do it's #SP 730

[The dude]

I guess I am worried about a nice finish out of a spray can product. Can any vouch for trying this?

I will check to see hwat clear he sold me tonight.

[ekam]

I've seen the faded calipers with clear coat coming off, I don't think putting the clear coat back on will bring the color back. Wouldn't it be better to just sand them down and repaint them fresh?

[Wret]

I found high temp clear coat in the parts store next to the other high temp paints. I completely repainted mine on the car with fresh decals. It's been a couple of years now and everything still looks as good as new.

Unless you race the car it is unlikely that your calipers will ever get anywhere near 350° but I would use the hi-temp stuff anyway.

[The dude]

Originally Posted by Wret

I found high temp clear coat in the parts store next to the other high temp paints. I completely repainted mine on the car with fresh decals. It's been a couple of years now and everything still looks as good as new.

Unless you race the car it is unlikely that your calipers will ever get anywhere near 350° but I would use the hi-temp stuff anyway.

Spray can paint? Were the Porsche logo's decals? It looks like it is also paint.