08-16-2011, 07:38 PM
|
#1
|
|
Autobahn Glanz
Join Date: Dec 2010
Location: Charlotte, NC
Posts: 1,282
|
Dre, darn good question. Is it maybe just for looks?
|
|
|
08-17-2011, 08:54 AM
|
#2
|
|
Registered User
Join Date: Nov 2006
Location: Bastrop, TX
Posts: 705
|
DRE,
I just ordered and installed the depo lights as well. The outside LEDs are the rear fog lights, and just the drivers side works anyway.
So what I did was to plug the outside LEDs into the rear light blub spot, NOT the Brake light spot, but the spot that lights up as part of the rear night lights. The problem is that the wire is too short. So to avoid cutting the wire, I cut the plastic to allow the wire to pull over to the spot.
Now I have night LEDs and LED brake lights.
bulb turn and reverse lights. and bulb drivers fog light.
__________________
2002 S
Pedro rear stabilizer bar, CF strut braces, Maxspeed headers with 100 cell cats, Fabspeed cat bypass pipes, H&R springs with M030 setup, TRG rear links, EVO air intake, B&M Short shift kit, Raby IMS upgrade, Raby underdrive pulley
|
|
|
08-17-2011, 04:59 PM
|
#3
|
|
Autobahn Glanz
Join Date: Dec 2010
Location: Charlotte, NC
Posts: 1,282
|
That's right, I knew that...just becoming forgetful  . Ya it only comes on with the fog lights and on one side. Porsche must have figured that when we turn on our fog lights we are actually in fog and it would be helpful if some one doesn't rear end because of the limited sight.
That is cool what you did, I'll have to take one back off and try that. LED parking lights nice!
|
|
|
08-18-2011, 06:39 PM
|
#4
|
|
Registered User
Join Date: Jul 2011
Location: Ontario
Posts: 26
|
Good idea!!! Thanks
Quote:
|
Originally Posted by jhandy
DRE,
I just ordered and installed the depo lights as well. The outside LEDs are the rear fog lights, and just the drivers side works anyway.
So what I did was to plug the outside LEDs into the rear light blub spot, NOT the Brake light spot, but the spot that lights up as part of the rear night lights. The problem is that the wire is too short. So to avoid cutting the wire, I cut the plastic to allow the wire to pull over to the spot.
Now I have night LEDs and LED brake lights.
bulb turn and reverse lights. and bulb drivers fog light.
|
|
|
|
08-23-2011, 08:11 PM
|
#5
|
|
Registered User
Join Date: Oct 2010
Location: Palm Springs
Posts: 2
|
I've had them for about 6 months. Love them.
|
|
|
08-24-2011, 07:09 PM
|
#6
|
|
Registered User
Join Date: Aug 2010
Location: Colorado
Posts: 36
|
@Shawn - do you have a full rear picture?
Your car looks great BTW.
|
|
|
08-24-2011, 07:16 PM
|
#7
|
|
Autobahn Glanz
Join Date: Dec 2010
Location: Charlotte, NC
Posts: 1,282
|
Actually Shawn's pic is exactly how mine look, neither of my photos seemed to show a real life representation of them. On my Guards Red they look really nice, I've not had one person say anything but positive which surprised me for an inexpensive after market system.
|
|
|
09-06-2011, 10:36 AM
|
#8
|
|
Registered User
Join Date: Aug 2011
Location: NY
Posts: 8
|
Depo LED Lights
Thanks for your write up on the Depo LED rear lights.
I was high bidder on a eBay pair and I am deciding if I should pay for the lights depending on your favorable recommendation.
Do you have LED night lights as well as LED brake lights and LED turn signals and LED back up lights?
You said you were able to install the right side fog light bulb only.
Did I get it all correct?
Is there anything about on the Depo set up that is lacking compared to the the factory rear lights?
Thanks.
|
|
|
04-27-2012, 04:27 PM
|
#9
|
|
Goth Popper
Join Date: May 2011
Location: New Orleans
Posts: 140
|
Quote:
Originally Posted by Shawn
I've had them for about 6 months. Love them.
|
Where'd you get that spoiler from and how does it work with the stock spoiler?
__________________
504-722-3857
www.appleneworleans.com
|
|
|
04-27-2012, 05:26 PM
|
#10
|
|
Registered User
Join Date: Aug 2011
Posts: 123
|
You can reroute the wires so one of the sets of LEDs feeds the rear running lights and the other set of LEDs feeds the brake. I have my DEPO lights set that the inside set of LEDs are always on when my lights are on and the outside set for brakes. It takes a little patience to feed the wire plug through the light assembly but worth it.
__________________
SOLD 2001 Boxster S, Arctic Silver, Painted Bumperettes, De-Ambered, Chrome Badging and Emblems
[No longer active on this forum]
Last edited by AndrewG; 04-27-2012 at 05:28 PM.
|
|
|
02-22-2013, 01:45 PM
|
#11
|
|
Usercpy
Join Date: Aug 2012
Posts: 205
|
not the best pic....  , just installed smoked tail light, way much cooler than oem..
and thanks to coco701111 from ebay for fast shipping overseas..
__________________
http://www.flickr.com/photos/flickr_ching/
|
|
|
03-02-2013, 10:44 AM
|
#12
|
|
Registered User
Join Date: Nov 2004
Location: New Jersey
Posts: 8,709
|
Quote:
Originally Posted by AndrewG
You can reroute the wires so one of the sets of LEDs feeds the rear running lights and the other set of LEDs feeds the brake. I have my DEPO lights set that the inside set of LEDs are always on when my lights are on and the outside set for brakes. It takes a little patience to feed the wire plug through the light assembly but worth it.
|
I peeled back the grommet, moved the other wires out of the way and still could not get the plug to fit in that little space. Then being impatient I got out the drill gun. 
don't do this without moving all the wires out of the way. But with two 1/8 holes it cleared enough space.
I'll miss that parking light though. I use that all the time when I leave the car parked in a dimly lit parking lot. makes the curious think someone's in the car.
EDIT:
You don't lose the parking light after all. But strangely after i start the car and turn on the lights the rear lights will only turn on if i turn the lights off and then turn them back on again. Also, its a good idea to have some touch up paint handy. I had some chipping under the old tail lights and Depo lights have a slightly smaller footprint which revealed the paint chip.
__________________
GT3 Recaro Seats - Boxster Red
GT3 Aero / Carrera 18" 5 spoke / Potenza RE-11
Fabspeed Headers & Noise Maker
BORN: March 2000 - FINLAND
IMS#1 REPLACED: April 2010 - NEW JERSEY -- LNE DUAL ROW
Last edited by Perfectlap; 03-02-2013 at 11:15 PM.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 12:20 PM.
| |