Glaze on Calipers peeled off

[psugrad93]

Does anyone have any exeperience with the glaze on the red calipers peeling off? My car is not garaged and this is what has happened, so the finish and color are now dull.
What are the steps to refinish them?

[Jaxonalden]

Sounds like your calipers were "painted" after the fact. The heat generated from the brakes is the probable cause of the pealing. I believe OEM calipers are powder coated just for this fact.

[jhandy]

Actually that's not the case. The factory calipers have a clear coat that can be damaged. Mine started to peel a few years back and now they are totally flat red. Wheel and brake cleaners combined with high pressure washing is what caused my problem.
Live with it or repaint.

[Jake D]

I had the same issue and it really bugged me. It reminded me of my first car, a red Toyota Celica that the paint faded and was almost redish pink.

Anyway its not perfect, but I took brake cleaner and cleaned my calipers really well making sure to chip off most of the peeling clear. Once they were clean and dry, I taped off the rotor and then resprayed the caliper with clear coat enamel in a can that I bought at like lowes for another project. It set up good and has not come off yet, and the calipers are shiny again. Will it last forever? Probably not, but I'm happy with it for now

[t2-bxtrs]

Have you tried using Cleaner Wax/Polish yet? could be worth the try with a minimum expense... let us know?
good luck.

[Cloudsurfer]

Cheap fix? Re-paint with any of the caliper paint products available.

Right fix? Break down calipers, have them powder coated or high temperature painted, re-assemble with new seals and dust boots and never worry about it again and enjoy better than new looks.

[violametallic-S-]

Had the same issue, for sure its from rim cleaner spray.

I repainted them ,4 coats, new porsche sticker. looks great.

Now i wash my rims with soap and water.

Originally Posted by Cloudsurfer

Cheap fix? Re-paint with any of the caliper paint products available.

Right fix? Break down calipers, have them powder coated or high temperature painted, re-assemble with new seals and dust boots and never worry about it again and enjoy better than new looks.

[Idaho Red Rocket 3]

I had the exact same experience JakeD had. It works...cheap...easy.

[Cloudsurfer]

Originally Posted by Idaho Red Rocket 3

I had the exact same experience JakeD had. It works...cheap...easy.

As long as you keep the car off the track, and the calipers don't need help in terms of seals, this isn't the worst route to take.

[psugrad93]

I think I might try the clear coat enamel in a can route. The issue with painting, re-labeling, etc. is obvious as far as cost, time, etc.

Do you happen to know what brand of clear coat enamel you used?