04-16-2011, 11:17 AM
|
#1
|
Registered User
Join Date: Apr 2011
Location: Bragg Creek
Posts: 6
|
IMS - Just in Time
Bought my 2000 S March 2010 with 65K miles. Shortly after the purchase, interested in spending some $ on performance. I was looking to find the best value upgrades for intake, exhaust, cams, wheels.
After reading the various posting on this forum over the past several months, my decision reluctantly turned towards the IMS, Clutch and RMS. The car now has 73K miles on it.
The first step that PMO was getting the exhaust off, even after hitting it with penetrating oil for one week. Once the exhaust was out of the way, I was at the flywheel in short order (almost, had to drive to Napa to get a speciality sock for one unique bolt holding the tranny to the engine).
The second thing that PMO was I was too late for the clutch job and dual ma$$ flywheel is pooched which just about doubles project costs.
The third thing the PMO was getting the nut off the IMS bolt. I only have a propane torch so it was tough getting enough heat to it.
Finally got the IMS out last night. Just in time as there is a lot of play in the bearing. I removed the plastic insert and half the dual row bearing fell out when i turned it over. It's very likely the chain would have jumped the sprocket soon.
For anyone out there who wants their $ go to the fun go fast goodies like I did, I have to say follow the good advice of the forum and spend your money on M96 flaw. I'm sure it just saved me a lot of time, grief and money.
|
|
|
04-16-2011, 01:46 PM
|
#2
|
Registered User
Join Date: Apr 2010
Location: New Jersey
Posts: 160
|
What does "PMO" mean?
__________________
CURRENT: Audi TT / Audi A3
PREVIOUS: Porsche 911, Boxster, 968, 912E / BMW 228xi, Z3, 128i, 318ti, 328xi / Audi TT / Mercedes SLK / Fiat 124 Coupe, Spider
|
|
|
04-16-2011, 02:02 PM
|
#3
|
Registered User
Join Date: Apr 2009
Location: Toronto, Canada
Posts: 40
|
I caved...
Knowing the risk of what could happen "if" and the cost for replacing the engine was no longer a "wait and see" decision. So i bit the bullet this week and had the IMS upgraded with LNE solution kit, replaced the RMS seal and what the heck i decided to replace the clutch and flywheel assembly. The OEM bearing was still in very good condition with no sign of wear and tear. The RMS was leaking slightly. The clutch had roughly 30% life remaining.
So I can now sleep at night for another 60K miles!
Happy Motoring.
__________________
2004 Boxster S with 29K Miles,- H&R performance springs
- Fabspeed sport exhaust with secondary cat by-pass
- B&M Short shifter, EVO VFlow cold air intake
- 19x8.5 front PS2 235/35/19, 19x10.5 rear PS2 275/30/19
- Kenwood HD6990 Navi, Voce speakers, 8" sub and Hertz amp
|
|
|
04-16-2011, 02:18 PM
|
#4
|
Registered User
Join Date: May 2008
Location: Toronto
Posts: 2,656
|
^Did you get it done at Mantis?
|
|
|
04-16-2011, 07:40 PM
|
#5
|
Registered User
Join Date: Apr 2009
Location: Toronto, Canada
Posts: 40
|
Yes. Mantis is my main shop for aftermarket performance upgrades. They are also an authorized dealer for LNE - they have completed many IMS upgrades.
*Dropped off the car on Monday morning and it was ready Tuesday afternoon... awesome. Peace of mind.
__________________
2004 Boxster S with 29K Miles,- H&R performance springs
- Fabspeed sport exhaust with secondary cat by-pass
- B&M Short shifter, EVO VFlow cold air intake
- 19x8.5 front PS2 235/35/19, 19x10.5 rear PS2 275/30/19
- Kenwood HD6990 Navi, Voce speakers, 8" sub and Hertz amp
|
|
|
04-16-2011, 08:04 PM
|
#6
|
Registered User
Join Date: Oct 2010
Location: Nampa, ID.
Posts: 488
|
What was the damage to your wallet ?
|
|
|
04-17-2011, 01:57 PM
|
#7
|
Registered User
Join Date: Mar 2008
Location: near Chicago
Posts: 523
|
I'm guessing PMO = Pissed Me Off?
|
|
|
04-17-2011, 01:58 PM
|
#8
|
Registered User
Join Date: Sep 2009
Location: toronto
Posts: 2,668
|
Ahhh didn't know mantis were doing them
__________________
986 00S
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 11:42 AM.
| |