Aftermarket seat question
For those who have installed aftermarket racing seats, how have you connected the wiring harnesses so that you don't get the seat belt or airbag light?
|
which model year?
|
2000 Box S. Stock had full power seats, unheated.
|
then it's simple:
you need to buy a seatbelt receptacle (they pop up from time to time on eBay) and plug it in the wiring harness. I have this 2nd receptacle mounted to my race seat, so that I can use my 3 point harness to/from the track Taking the existing receptacle off from the stock seat and re-attaching it is a major pain in the behind and it's worth the $50 ~ $60 for the extra receptacle for not having to do this The alternative would be to buy a Durametric and reset the airbag loght when your stock seats are back in |
Here is a DIY with pics that I used to install my race seat and avoid the airbag light. Good luck!
http://gallery.rennlist.com/gallery/albuq41 |
Let me know if you need a Brey Krause bracket and sub strap bar. Have one I've mounted but never used.
|
All times are GMT -8. The time now is 04:55 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website