Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 11-09-2010, 04:48 AM   #1
Engine Surgeon
 
Join Date: Aug 2008
Location: Cleveland GA USA
Posts: 2,425
Thats the area where the overflow exits the car. You probably had an air pocket that created a belch out the overflow.. Top off the coolant and you should be good to go.. Just keep an eye on it.
BTW- Water pumps need to be changed every 3 years to resist issues stemming from cracked heads due to broken impeller blades.

Just keep an eye on this, lots of very early intermix issues begin with a symptom like this, especially if the car is a '99
__________________
Jake Raby/www.flat6innovations.com
IMS Solution/ Faultless Tool Inventor
US Patent 8,992,089 &
US Patent 9,416,697
Developer of The IMS Retrofit Procedure- M96/ M97 Specialist

Last edited by Jake Raby; 11-09-2010 at 04:53 AM.
Jake Raby is offline   Reply With Quote
Old 11-09-2010, 09:43 AM   #2
Registered User
 
tonycarreon's Avatar
 
Join Date: May 2009
Location: Frederick, MD
Posts: 1,396
same thing happened to me last month. i checked my coolant and it appeared topped up. went to get gas at the station a mile from the house. as i was filling up i looked down and realized it was dumping coolant. when my heart stopped racing i thought to check the cap. l looked and sure enough it was slightly crooked meaning i'd skipped a thread. took it off, topped it off with a little distilled water and put the cap back on and it's been fine ever since. *phew*
__________________
"Speed has never killed anyone, suddenly becoming stationary... that's what gets you."
tonycarreon is offline   Reply With Quote
Old 11-10-2010, 12:41 AM   #3
Registered User
 
Join Date: Apr 2004
Posts: 89
Thanks for the replies, guys.

I drove the car out with trepidation this morning and so far, all is well. So a gas bubble pressure overflow sounds like what caused it. I bled the cooling system last night and heard some bubbling noise when I opened the valve.

My coolant cap ends in 01.and there were a lot of condensed steam on the rear trunk lid, so I guess that cap is no good. Getting a replacement today.
__________________
--1989 Mazda MX6 GT
--1997 Porsche Boxster
--2005 Lexus RX330
--2007 Maserati Quattroporte Sport GT
Jinster is offline   Reply With Quote
Old 11-10-2010, 06:35 AM   #4
Registered User
 
ppbon's Avatar
 
Join Date: Nov 2005
Location: Florida
Posts: 529
In order to make sure all the air is bled, follow the instructions found here:
http://www.pedrosgarage.com/Site_3/Install_3rd_Radiator_%26_Coolant_System_Bleeding_I nstructions.html
Scroll down half way and you'll see the bleeding instructions.
Also, check your coolant cap and/or any cracks on the reservoir.
That bubble of air got into the system because of a leak.
The most common is the coolant cap.
Happy Boxstering,
Pedro
__________________
Racecar spelled backwards is: Racecar!
ppbon is offline   Reply With Quote
Old 11-11-2010, 06:58 PM   #5
Registered User
 
Join Date: May 2010
Location: edmonton,alberta,canada
Posts: 104
Garage
Just went thru this. Newest model for cap ends in -04. Get the latest cap. Clean out the trunk.bleed the reservoir. While ur cleaning out trunk , pull back carpet and inspect the reservoir. They say it may possibly leak from then level sensor also. Yes some of them crack. After reading most of the threads on this very imformative forum....I was glad mine was just the cap. No problems since I put the new cap on last sat. Btw if u pull up the black plastic under the oil cap and antifreeze reservoir cap u'll notice a hole for fluid drainage. This is also where the pressure bleed valve is. It promptly pours out in front of the passenger rear tire . Found this out by pouring water too quickly into reservoir. Now I know. Now so do u. Hope this helps. Cheers.
__________________
Living one calculated risk @ a time
chris97boxster is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 12:21 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page