Need help with engine error codes on 99 Boxster
 

I have the following engine error P-codes:

P0102 (Mass air flow sensor, short to ground/below lower limit/ lean mixture threshold)

P1124 (fuel pump relay output stage, short to ground/below lower limit/lean mixture)

P1126 (oxygen sensing adaptation, lower load range, cyl. 1-3, short to B+/above upper limit/ rich mixture threshold.)

I would be immensely grateful to anyone who has ideas on where to start. Thank you soooo much!

Colby

First thing I would do would be to hook the car up to my Durametric tool, and see what the MAF sensor reads at idle, and at the high rpm point, and see if the values are inside or outside of spec.

If they are all in spec, then I would look at the O2 sensors being the cause, or trying to track down an air leak on the indicated cylinder bank.

BC.

In all the intake and throttle body work
 

did the MAF get disconnected, the connection somehow damaged, the intake somehow compromised to allow an air leak, the MAF itself damaged, something get in to short out the MAF?

The P11xx series can be caused by a bad MAF reading. The P0102 code is so specific that there is a short or damaged wiring that I guess that is where I start.

Thanks for the replies. I'll test/clean the MAF sensor this week and if that doesn't help then I'll check out he 02 sensors.

How'd that work out for you?

not well, now the engine light's going on immediately, even if I disconnect the battery. lol