window jumping
From outside the car when I operate the driver's outside door handle the window correctly drops and the door can be properly opened. However, when at any stage I release the handle the window goes back up (which the passenger side does not do) preventing closure of the door.
Similarly from the inside, I cannot pull close close the door because the window fouls on the hood; the window remains up unless I operate the inside handle. I can cheat to get the door to close by pulling slightly the handle whilst pushing (ie slamming) the door closed. Is this merely a 'programming error'or worse? 1999 986 |
there's lots of info and discussion. search on 'window'
also the link below may assist you good luck http://www.ppbb.com/phorum/read.php?19,1565400,1565407also |
I have had this problem. Everything you need to know is in the link below and in the link posted by sb01box.
http://986forum.com/forums/showthread.php?t=15088 Good luck on the repair! :cheers: |
All times are GMT -8. The time now is 02:37 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website