I need help with the pedro sport exhaust
 

Hey guys

Im going to be doing the Pedro Sport exhaust mod this week and was wondering if anyone has instructions or pictures of it for the 2003, 2004 Boxsters where the tubes come in from the top (not from the sides). I just want a picture of it and instructions to show the shop. Also what size tube is recommended and where can I get it.

Thanks

Here you go...
 

... these pix are from an '04 with the Pedro Sport Exhaust with 1.5" diameter tubes.

http://i83.photobucket.com/albums/j3...n/PICT1719.jpg

http://i83.photobucket.com/albums/j3...n/PICT1720.jpg

http://i83.photobucket.com/albums/j3...n/PICT1721.jpg

Hope it helps.
Happy Boxstering,
Pedro

thanks. whats the difference with the 1inch compared to the 1.5 inch tube? also does it have to be bent in a certain way to clear when installed?

thanks

1" is way too thin...
 

... I had originally used 1.25" which was also quite narrow, so I recommended 1.5" diameter.
The sound is much better. It has a lower pitch, closer to a 996.
Get some flexible copper tubing and bend it to the shape you want, then take that bent tube to your mandrel bender and have them bend the 1.5" tube accordingly.
Happy Boxstering,
Pedro