Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 02-04-2010, 02:22 PM   #1
Registered User
 
ChrisZang's Avatar
 
Join Date: Mar 2006
Location: San Carlos, CA 94070
Posts: 1,450
Quote:
Originally Posted by Stroked & Blown
Try reversing the polarity (put the bulb in the other way) if you haven't already.
That is really HARD to do with the signal bulbs, it's about the same as trying to reverse polarity on a standard screw in light bulb
__________________
I still wave at Boxsters, but they no longer wave back :-(
2002 Boxster S "Violet" (sold but not forgotten)
2009 Carrera 4S "Kelsey" (current ride)
2015 FIAT 500e "Nikki" my commuter car
ChrisZang is offline   Reply With Quote
Old 02-04-2010, 05:38 PM   #2
Registered User
 
Join Date: Nov 2009
Location: Greenville SC
Posts: 85
LED effecting Cruise Control

One other thing to look out for when switching tail lights to LED. When I switched to the DEPO with LED tail lights that plug into the old bulb sockets my cruise control quite working. I had to go to the auto parts store and by a small light with socket and wire into one of the tail lights to trick the system into thinking a regular bulb was instailed for the cruise control to work. Its actually a bulb and socket made to light up a liscense plate. I hid the bulb behind the carpet in the trunk.
This is on a 1997. I am not sure about other years. You can test it by pulling both bulbs. As longs as one bulb is identified by the computer the cruise will work.
DamageINC123 is offline   Reply With Quote
Old 02-08-2010, 12:23 PM   #3
Registered User
 
Join Date: Apr 2009
Location: Bothell, WA
Posts: 279
Quote:
Originally Posted by ChrisZang
That is really HARD to do with the signal bulbs, it's about the same as trying to reverse polarity on a standard screw in light bulb
You have to make the change in the wiring harness, it's not about how you install the bulb.

-james
__________________

'01 Boxster S, 51k miles
'05 Mazda 6 Grand Touring Wagon
yimmy149 is offline   Reply With Quote
Old 02-09-2010, 02:20 PM   #4
Registered User
 
Join Date: Jun 2005
Location: Toronto
Posts: 157
Here is a link to a source for LED specific flashers, but you may run into issues if you are only switching to LEDs in the rear and not the front.

http://autolumination.com/equalizers.htm

Google LED turn signal flasher and you will get lots of info.
__________________
1997 Boxster
http://i40.tinypic.com/ax1qhz.jpg
Aron in Toronto is offline   Reply With Quote
Old 02-09-2010, 04:13 PM   #5
Registered User
 
ChrisZang's Avatar
 
Join Date: Mar 2006
Location: San Carlos, CA 94070
Posts: 1,450
Quote:
Originally Posted by yimmy149
You have to make the change in the wiring harness, it's not about how you install the bulb.

-james
I don't think I will change the whole car to positive ground for that.
I'll first go the route of trying an electronic flasher module
__________________
I still wave at Boxsters, but they no longer wave back :-(
2002 Boxster S "Violet" (sold but not forgotten)
2009 Carrera 4S "Kelsey" (current ride)
2015 FIAT 500e "Nikki" my commuter car
ChrisZang is offline   Reply With Quote
Old 02-10-2010, 07:27 AM   #6
Registered User
 
MN 986's Avatar
 
Join Date: May 2008
Location: MN
Posts: 327
Garage
I don't have any experience with them, but during a recent scan of misc. items for a Boxster on eBay I ran across 'LED load equalizers' on eBay from a seller called sportscarextras. I don't know how to ad a link, but current eBay item # is 120526830998.
Maybe worth a look?
Good luck!
MN 986 is offline   Reply With Quote
Old 02-10-2010, 03:51 PM   #7
Registered User
 
ChrisZang's Avatar
 
Join Date: Mar 2006
Location: San Carlos, CA 94070
Posts: 1,450
Thanks, the stuff that I ordered from v-leds should arrived tpnoight and now I know:
I am now officially an idiot :ah:
The rear signal bulbs have indeed switched polarity - so all the posters who told me to change plus and minus were right and I was wrong

Of course, Porsche doesn't make this easy for you, but your Dremel tool and your soldering iron is your friend
__________________
I still wave at Boxsters, but they no longer wave back :-(
2002 Boxster S "Violet" (sold but not forgotten)
2009 Carrera 4S "Kelsey" (current ride)
2015 FIAT 500e "Nikki" my commuter car

Last edited by ChrisZang; 02-10-2010 at 08:42 PM.
ChrisZang is offline   Reply With Quote
Old 02-11-2010, 05:30 AM   #8
Registered User
 
Join Date: Jul 2005
Location: MA
Posts: 882
For 194 style bulbs (corners) you can just turn them around.

For the turn-in style, I wonder if you can order LED bulbs with reversed polarity..
__________________
98 Arena Red 986
Stroked & Blown is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 06:37 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page