986 Forum - The Community for Porsche Boxster & Cayman Owners - Is there a special tool to remove Alternator?

- Boxster General Discussions (http://986forum.com/forums/forumdisplay.php?f=5)

- - Is there a special tool to remove Alternator? (http://986forum.com/forums/showthread.php?t=20082)

Is there a special tool to remove Alternator?

Hello,

Wondering if anyone can help me I have 1997 porsche boxster and need to replace the alternator . I already ordered it but need to know if I need this special tool that is on ebay to remove as well as install the alternator?.... This the link if you could be so Kind to tell me if I need it or not .

http://cgi.ebay.com/ebaymotors/Alternator-Tool-19mm-VW-Audi-Porsche-Boxster-mustang_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66 Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c2 93Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZ item170313646779QQitemZ170313646779QQptZMotorsQ5fA utomotiveQ5fTools

no special tools are needed.

i would however recommend a (24" or 22" can't remember) shallow socket for the pulley.

State is correct, no special tools are needed.

The special tools are only needed if you need to swap pulleys. eg from a fixed pulley (base) to a clutch pulley (S).

FWIW, pay attention to the way the wires route in the back. You don't want to mix em up. Also, if you route them differently, you'll be fighting the cable as you swing the alt back into place.