986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/index.php)
-   Boxster General Discussions (http://986forum.com/forums/forumdisplay.php?f=5)
-   -   Buying a hardtop (http://986forum.com/forums/showthread.php?t=17820)

Mike_Yi 08-07-2008 09:28 PM

Buying a hardtop
 
I'm talking to a guy who has agree to sell me his '01 hartop for $750. I haven't seen it yet. Any advice on what to look at when I go see it, or is it pretty straightforward?

angman 08-07-2008 09:52 PM

$750 is a steal if its not broken/damaged. Not sure what to look for as its pretty straightforward. Check to make sure that the rubber seals all around are still good. See if the plug/wire for the heated glass window is still there. Check for any damage to the elements on the glass window. Ask if the seller has the porsche cover for it, a rolling or hanging stand, and the plastic cover to go over the latch when installed. The rest is probably all cosmetics, but even if its scratched up or wrong colour its a great price.

Chippy 08-08-2008 01:25 AM

Dont forget....
 
That you'll need the spin lock inserts and pinch bolts to fit it.

Mike_Yi 08-08-2008 07:05 AM

I've got the spinlocks. Put them in yesterday.

greesedc 08-08-2008 01:59 PM

Snatch that thing up!
 
Quote:

Originally Posted by angman
$750 is a steal if its not broken/damaged. Not sure what to look for as its pretty straightforward. Check to make sure that the rubber seals all around are still good. See if the plug/wire for the heated glass window is still there. Check for any damage to the elements on the glass window. Ask if the seller has the porsche cover for it, a rolling or hanging stand, and the plastic cover to go over the latch when installed. The rest is probably all cosmetics, but even if its scratched up or wrong colour its a great price.

I just bought one a few weeks ago on ebay for $1500. It was the right color and had most all the parts minus the spin locks. Shipping was the steal for me...*$100 from IN to CO! After a few good buffings, only a couple of scratches left, but ok by me.
Had to order the center cover and a rear snap on cover from the dealer for less than $20 each. Estimate to repaint was almost $600 :eek:
But....and it is a big one, when I priced the seal from the dealer, it is almost $700!
Fortunatly, mine has only a small tear at the metal piece near the front top of the rubber and I can live with it.

I have gotten a lot of looks and compliments on the top. It has more squeaks than the soft top I think, but when winter comes I think I will be more than happy in my "1/2 Cayman". ;)

*the top was professionally packed by a moving company and shipped via motor freight and arrived completely intact.

Mike_Yi 08-08-2008 03:20 PM

Fortunately, this top is only about an hour drive from here. Unfortunately, it's the wrong color. I've got a good friend who just sold his body shop, but he still has the equipment to paint. I think he'll probably offer to paint it cheap if I help him. He does great work too, especially since he knows how much of a perfectionist I am when it comes to my cars. I know it doesn't have a cover or any kind of stand as he said it is just wrapped up in a blanket. Hopefully, it's not damaged and the seals are in good shape.

BTW, how does the hardtop effect headroom. I fit in with the top up, but it's close. I can't imagine they'd make the hardtop any shorter. Would they?

angman 08-08-2008 03:29 PM

I don't notice much of a difference from the soft top to the hard top. The hard top doe ssqueek a bit over bumps whereas the soft top doesn't much if at all. it also traps in the engine and exhaust noises a lot more.

KevinH1990 08-08-2008 03:31 PM

Quote:

Originally Posted by Mike_Yi

BTW, how does the hardtop effect headroom. I fit in with the top up, but it's close. I can't imagine they'd make the hardtop any shorter. Would they?

I think it is about the same. It might seem a bit more spacious because the window on the hard top lets in more light.

Jeph 08-08-2008 04:10 PM

Quote:

Originally Posted by KevinH1990
I think it is about the same. It might seem a bit more spacious because the window on the hard top lets in more light.

Yeah, seems more spacious to me. I think the roof line stays higher towards the rear of the car. The convertible top seems to slope downwardly sooner than the hardtop.

It's certainly not less roomy.

Mike_Yi 08-09-2008 05:13 PM

Quote:

Originally Posted by Jeph
Yeah, seems more spacious to me. I think the roof line stays higher towards the rear of the car. The convertible top seems to slope downwardly sooner than the hardtop.

It's certainly not less roomy.

Well that's good news.

Rareair 08-11-2008 08:13 PM

Good news for you is that you can inspect & fit the roof to ytour car since it's located fairly close. The top is not made of metal, but rather a fiberglass-like composite material, so storage of the top is of utmost importance.
Ask the selle how the top was stored. Proper storage would have been in an upright position with the weight of the top on the rear window (ala roof cart) or hanging on a wall or floating ceiling with no weight on the top itself. If the seller stored it flat on the ground, the top can easily twist & the top will no longer align with the Boxster body.

Mike_Yi 08-12-2008 07:39 AM

That's great to know. I'll have to ask him how it is sitting.

KevinH1990 08-12-2008 08:27 AM

Quote:

Originally Posted by Rareair
The top is not made of metal, but rather a fiberglass-like composite material, so storage of the top is of utmost importance.

OEM tops are aluminum.

It is important to store the top carefully to avoid damage. I found that my top (purchased used) seems to have conformed to the shape of my car. It is easier to put on and take off than it was when I first bought it. You can adjust the fit of the top if necessary.


All times are GMT -8. The time now is 11:42 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website