Bosch Spark Plugs - Copper vs. Platinum - 986 Forum - The Community for Porsche Boxster & Cayman Owners

dja1980 · 06-01-2008, 02:48 PM

I'm due for my first spark plug change, and I'm having a difficult time finding the recommended plugs locally. After doing some research, I found that the OEM plugs for my 2002 3.2L Boxster S are Bosch FGR 6 KQC. The problem I'm having is that even online, these plugs are somewhat difficult to find. However, I'm am finding a lot of the FGR 6 KQE, which I believe are the same plugs, but in Platinum as opposed to Copper. Are the Copper plugs superior to the Platinum ones in any way? If so, I've got a local import parts store that can special order them for me for around $10/ea. Otherwise, I will just go with the Platinum ones, which seem to be much more readily available. I'm sure Porsche must have a good reason for using the Copper ones as OEM instead of the Platinum ones. I also called the dealership to see if they stocked the Bosch plugs, but they told me they only carry Beru. I forgot to ask whether these were Copper or Platinum though. Thanks in advance for you help... dave

06-01-2008, 02:51 PM

Buy OEM plugs. Easy to buy on the internet:

http://e-partssales.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=P&Product_Code=986plu&Category_Code=986engele

Lil bastard · 06-01-2008, 09:09 PM

Beru is also an OEM Plug.

There have been issues reported using Platinum plugs, the tips have broken off and bouced around inside the cylinders - not a desireable thing.

dja1980 · 06-02-2008, 06:59 AM

Thanks guys! So if both the Bosch and the Beru plugs are OEM is one superior to another? I know my dealership is selling the Beru ones for $14 and some change/ea. Thanks to the link bmusatti provided, it looks like I can get the Beru plugs for around $63/set shipped. I can also get the Bosch plugs from the import parts store I previously mentioned for around $63/set including tax. My point is, if both the Bosch and Beru plugs are OEM, and I can get them for the same price, should I choose one brand over the other? Thanks again. Your information has been very helpful.

Jaxonalden · 06-02-2008, 09:49 AM

My experience, I went with the Beru because I couldn’t find a set of Bosch (platinum) with dual grounding electrodes like the OEM recommends. If I could have my way I would install a four grounded electrode Iridium plug, but they don’t make those for our needs yet.

In case you ask why dual over single electrode? Exposed spark kernel.

Iridium over platinum? Iridium is harder that platinum and will not corrode or wear and you can make the plug tip the size of pin head. This coupled with four grounding electrodes means a spark that will never degrade, no matter what. And requiring less energy to operate. My Lexus came with a set installed and you don’t change them for 100,000 miles.

dja1980 · 06-02-2008, 10:48 AM

Jaxonalden - Aren't the Bosch FGR 6 KQE and FGR 6 KQC plugs four electrode? Since dual is better than single, is it safe to assume that four is better than dual? It's starting to seem like the Bosch Copper plug is the way to go?

Does anyone know if the OEM Beru plugs are Copper or Platinum?

So, from what I've learned so far...

Copper is better than Platinum because the Platinum tips can break off into the cylinders. And, Iridium is better than Platinum because it is harder and will last longer. So, is Iridium also better than Copper, or does Copper have its advantages too?