Fred, because your message came in as a "Visitor" message, I was limited in how many characters I could send back to you. I did anyway, but here's the original message:

fredinVa;
Yes, I still have it.
I don't have much history prior to me buying it about 18 months ago. I pulled it from an '04 S with 85k-ish miles, that was front-end-crashed, and put it in my '03 S.
When it first arrived, I hooked up the durametric to it and checked cam deviation and did a compression test on all cylinders; all of this checked-out very good. Then as I was changing fluids, I split-open the oil filter and looked for particles, and found nothing concerning.
Once installed, I put about 1500 miles on the oil I'd put in it, and then sent a sample to Blackstone. They gave it a thumbs-up.
Since that time, I've put about 5000 miles on it; mainly track and commuting to/from the track. It has performed flawlessly, with no hiccups, noises, smells, smoke, steam, stink or any other thing that would concern any of the senses, haha.

Of note: I installed an underdrive-pulley on it; this requires filing-off the tip of the TDC-Tool-bung on the front of the motor. [URL="https://tunersmotorsports.com/trs-development/installation-guides-instructions/trs-porsche-4-inch-under-drive-pulley-installation-guide/"](see here for more information)

What else can I tell ya?

Do you have the stock crank pulley?

Any other mods?

Any maintenance history (besides the oil changes)?

Are you willing to ship to Virginia? (my cost of course)?

ok, third try (the forum does not like me apparently)

Any other maintenance history (IMS, RMS, chain guides, tensioners, etc)

No IMS done under my watch. I didn't even look closely at it when I swapped it in, because I'm not a believer. ;-)

RMS; no signs of leaking, so don't fix what ain't broke.

with cam deviation numbers such as they were, I wouldn't be surprised to learn perhaps the tensioners / guides had be done, but I doubt it. ??

Thanks again for the quick response.

I will put my further questions in a PM.

I sold the lightweight flywheel and clutch, so when I removed it this evening, I took a moment to snap some photos before I put the oem flywheel back on.

You'll note: still no signs of leaking rms. Someone smarter than I might know something from that IMS flange. Looks factory to me. ??https://uploads.tapatalk-cdn.com/202...7ff9057d37.jpghttps://uploads.tapatalk-cdn.com/202...8a590d86d0.jpg

Sent from my SM-G970U using Tapatalk

Just a quick update to the list, removing sold items.


Suspension

• -Tarrett Front Drop Links <1000 Miles (new $220) $150 PEND
  -SPL Pro Rear drop Links <1000 Miles (new $220) $150
  -Tarrett-style Custom (Beautiful) Camber Plates $300
  -M030 Struts w/unknown miles $
  -M030 Front bar $100 PENDING
  -M030 Rear bar $100 PENDING
  -FVD GT3 Adjustable LCA's <2500 miles (new $1,200) $750
  -Rear Upright L - New bearing $100
  -Rear Upright R - New Bearing $100

Brakes

• -Brembo 'S' Calipers - Front - $500
  -Brembo Calipers, Rear - $200
  -'S' Rotors front $200
  -'S' Rotors front 2nd-set $200
  -'S' rotors, rear $100
  -'S' rotors, rear, 2nd set $100
  -Braided brake lines F&R $139 $75
  -Various brake pads Track & Street

Drivetrain

• -3.2 engine, ~85k miles $3,000
  -78mm TB & plenum $200
  -987 airbox, MAF & Holder and assciated ducting to plenum $150 SOLD
  -EVO Air Filter spacer w/ NEW EVO perf, Filter $75 SOLD
  -LN Spin-On oil filter Adapter - NEW - Never installed (New $150) $100 SOLD
  -(6) CoilPacks with low miles. $
  -Halfshaft axles - <2k miles, L&R $150

Exhaust

• -Equal-Length headers, wrapped & treated $200
  -midpipes w/ 200-cel hi-flow cats. Wrapped & treated $100 SOLD
  -Catless Midpipes $75
  -Factory "catt-ed" exhaust manifolds $
  -New rear (after-cat) O2 sensors, still in box $
  -Ebay "Beluga" type muffler - ~2000 miles on it $100 SOLD
  -Ebay "Beluga" type muffler - ~2000 miles on it $100
  -Factory 'S' muffler $100
  -Factory 'S' muffler #2 $100

Wheels

• -Set of BEAUTIFUL 18" Carrera-style Boxster Wheels - Gold Powder coat $1,200
  -Set of Factory '03 'S' wheels (staggered, 17"), need restoration $400
  -Set of Factory "turbo twist" style wheels, good track wheels $300
  -(2) 12mm spacers $100
  -(2) 20mm spacers $100
  -(2) 30mm spacers $100
  -Fred's Gen 2 Center Caps - Blue, Perfect. $300
  -Fred's Gen 1 Center caps - red, powder-coated gold $250

Body

• -Joe Toth spoiler, never painted (with holes or I'll fill 'em for you) (New $250) $150
  -996 SideSkirts & hardware (Purchased Used for $300) $200
  -Modified Front bumper with GT3 lip/splitter $200
  -Hood
  -Trunk Lid
  -Doors
  -Blue Top - (about a 7 condition) Glass window $500
  -As New tail-lights, LED, Sequential turn signals, (new $400) $250 SOLD
  -3-Spoke steering wheel, Beige $400 SOLD
  -Good set of factory Cupholders $100 SOLD
  -Center Console, Beige $100
  -BOSE rear shelf subwoofer $150
  -BOSE Stereo w/ associated speakers, Cdchanger, etc. $250
  -03 S DME, Keys, Guages, ignition Switch & all locks, etc $750
  -Extra ('04 S) DME, Keys, Guages, ignition switch & all locks, Etc. $750

Other

• -PST2 Programming tool, Bosch, w/ all cables, etc. $1200
  -VR Tuning Tuner and tune (new $895) $450

Sorry for the late reply I am on vacation . They do appear to be OEM . Can you see how much to ship to a residence in zip 30533 ? . Town is Dahlonega Georgia . Thanks

PM sent! Interested in Joe Toth spoiler.

PM sent about track pads! Thanks!

Message sent.

An updated list of what remains.
Of course there are other items that haven't been listed here. If you're looking for an item and don't see it on this list, please look at the first post of this thread. If it's not there either, then I probably still have it but haven't yet listed it.
Or simply message me your wish-list, and I'll tell you what I've still got. :dance:

Suspension
Tarrett Front Drop Links <1000 Miles $150
Tarrett-style Custom (Beautiful) Camber Plates SOLD
SPL Pro Rear drop Links <1000 Miles $150
M030 Struts w/unknown miles
M030 Front bar $100
M030 Rear bar $100
FVD GT3 LCA's <2500 miles $750
Rear Upright L - New bearing $100
Rear Upright R - New Bearing $100

Brakes
Brembo 'S' Calipers - Front - $500
Brembo Calipers, Rear - $200
'S' Rotors front $200
'S' Rotors front 2nd-set $200
'S' rotors, rear $100
'S' rotors, rear, 2nd set $100
Braided brake lines F&R $75

Drivetrain
3.2 engine, ~85k miles SOLD
EVO Air Filter spacer w/ NEW EVO perf, Filter $75
78mm TB & plenum SOLD
(12) CoilPacks with low miles. (6 might go with motor)
Halfshaft axles - <2k miles, L&R $150

Exhaust
Equal-Length headers, wrapped & treated $100
Catless Midpipes $75
Factory "catt-ed" exhaust manifolds
New rear (after-cat) O2 sensors, still in box
Ebay "Beluga" type muffler - ~2000 miles on it $100
Factory 'S' muffler $100
Factory 'S' muffler #2 $100

Wheels
Set of BEAUTIFUL 18" Carrera-style Boxster Wheels - Gold Powder coat $1,200
Set of Factory '03 'S' wheels (staggered, 17"), need restoration $400
Set of Factory "turbo twist" style wheels, good track wheels $300
(2) 12mm spacers $100
(2) 20mm spacers $100
(2) 30mm spacers $100
Fred's Gen 2 Center Caps - Blue, Perfect. $300
Fred's Gen 1 Center caps - red, powder-coated gold $250

Body
Hood
Trunk Lid
Doors
Blue Top - about a 7 (condition) SOLD
Good set of factory Cupholders $100
Center Console, SOLD
BOSE rear shelf subwoofer $150
BOSE Stereo w/ associated speakers, Cdchanger, etc. $250
03 S DME, Keys, Guages, ignition Switch & all locks, etc $750
Extra ('04 S) DME, Keys, Guages, ignition swithc & all locks, Etc. $750
Windshield Washer with Heater Wire
Floor Mats
etc etc


Other
PST2 Programming tool, Bosch, w/ all cables, etc.
VR Tuning Tuner and tune $450

Any chance you got a shipping quote to 30533 on the rear axles ?

UPS Groudn is telling me $43.43 to ship one. (Calculated 18lbs, 40/8/8 box.)

you've been so incredibly patient with me, I'm willing to almost give these to ya, haha.
PM me and we'll talk about how many you want, and what they're worth for ya.

I bought a spec boxster, and need this gone.

I'm getting ready to start throwing stuff on ebay to get it out of here. If there's anything you want, please make me an offer QUICKLY.

Note that I really mean make me an offer. Make it reasonable, but I expect you to get a bargain from me.
But; please understand that the more questions you ask, beyond reasonable request for condition and pics of course, just makes it more difficult to sell and easier to just throw it on ebay. I need this tuff gone with the least amount of drama. I'd rather capture only half it's value, if it means I can spend half as much time doing it. :dance:

Also: if you want one item that's $5, i'ma care much less about that than if you want 15 items worth $5/ea. I need to make this worth my time to find a box and then go to UPS. I ain't running a business here..... :cheers:

thanks for understanding that.

All that said:

YARD SALE PRICING!!! Hahahaha.

Ah, darn it. You sold the Ohlins setup.

Pm sent to maytag

PM sent . And no rush on my part ;)

Sent you a PM with questions on the 17" wheels.

replied......