986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/index.php)
-   Boxster and Cayman Parts for Sale or Wanted (http://986forum.com/forums/forumdisplay.php?f=9)
-   -   FS: Cleaning out the shop, I need to get rid of a ton of parts (http://986forum.com/forums/showthread.php?t=76324)

JustinS 10-01-2019 09:15 AM

FS: Cleaning out the shop, I need to get rid of a ton of parts
 
I need to clean up my shop and make space for my 944 S2 which is sitting outside. I need to get rid of these parts. If prices are too high, please make me an offers. Prices do not include shipping.


S Brakes, rotors, pads and rear suspension/ebrake assembly. Make me an offer. The calipers have a few marks on them and the clearcoat is starting to show on a few of them. The rotors are within the min wear spec by about 1 MM. The rear pads need to be changed.

Drivers side tail light $50.00
Tiptronic clock spring - $40.00 Sold
Xenon Computer (996-618-051-09) - $20 Sold
Xenon level sensors - $30 for both Sold
Drivers / Passenger Side Door Harness - $20 / Each
Front trunk wiring harness (car had xenons)- $40.00
Drivers side headlight bracket - $40.00
Headlight switch - $75.00
Complete black interior carpet set - $125.00
Complete Front Trunk Carpet Set - $75
Complete Rear Trunk Carpet Set with foam bottom pieces - $75
Cupholders – (For parts, some pieces are missing) - $20.00
Upper console frame that was modified for a double din stereo - $20.00
Lower center console frame with upper storage bin and boxster s insignia - $50.00
HVAC Climate control display (one dead pixel) - $75.00
Boxster S sill plates - $25 each
Silver center console and window button tray (has a few scratches/chips)- $100 - SOLD
Tiptronic gear selector trim - $30.00
Black dashboard - $40.00
Ebrake lever - $40.00
Lock button / Defroster Button / Convertible Button / Cig lighter - $10 each or you can have the trim piece with all of the buttons for $25.
Wiper motor and linkage - $50.00
Tiptronic flex disc - $25.00
Tiptronic starter - $25.00 Sold
K&N 33-2773 Air filter (washable / reusable) - $15.00
986 Airbox (without MAF) - $50.00
986 Airbox tube - $25.00
Passenger side exhaust manifold - $100.00
Drivers side / Passenger side mid pipes - $125.00 for both
986 engine cover (from top)- $25.00
986 engine cover (from cabin) - $20.00
2.7L Muffler (stock) - $75.00
Heater core - $30.00
Master Cylinder / Brake Reservior / Brake Booster (all assembled in one piece) - $75.00
Tiptronic alternator - $50.00 Sold
Both litronic headlight washers - $50 for both
Stereo AMP - $20.00
Complete evaporator/blower housing assembly/box - $100
Front radiators with fans - $100 each
Front radiator brackets - $20 each
Tiptronic shifter - $40.00
Tiptronic shifter cable - 25.00
S front suspension pieces - make me an offer
S Rear suspension - make me an offer
Steering rack - $75.00
Secondary air injection pieces - make me an offer
Parting out a seat - let me know what you need
2000 Porsche Boxster 2.7L Fuel Injectors and fuel rail - make me an offer
half worn clutch disc, pressure plate, flywheel (unsure about flywheel condition)- make me an offer
Steering column with ignition switch - make me an offer
2.7L cooling hose set (all cooling hoses for the front of the car) - make me an offer



I have a ton of other misc parts if you can think of anything.


Pickup
Gas tank – free
2.7L cooling pipes - free
Duralast 94R-DLG battery (in good condition) - $20.00
OEM Glass soft top that the previous owner converted to a manual top (by cutting the tabs where the pushrods mount - $150)
17” S twist wheels (some marks)- $200
Passenger seat - no tears but center insert is starting to come out - $50.00

Quadcammer 10-01-2019 09:27 AM

what is the condition of the soft top? any holes or issues? Includes the whole frame I'm assuming?

JustinS 10-01-2019 11:41 AM

Quote:

Originally Posted by Quadcammer (Post 604276)
what is the condition of the soft top? any holes or issues? Includes the whole frame I'm assuming?

The soft top has the tabs cut off where the push rods mount onto it. There is also one small inch section in the front where the material is starting to lift up. I'm not sure if that material can simply be tucked back in under the seal or not. I will post pictures later.

Starter986 10-01-2019 11:48 AM

The engine cover... the top... $25.

How much shipped to 92262?

Thanks!

JustinS 10-01-2019 01:36 PM

Quote:

Originally Posted by Starter986 (Post 604284)
The engine cover... the top... $25.

How much shipped to 92262?

Thanks!

I sent you a PM.

Smhube00 10-01-2019 02:30 PM

How much to ship the xenon level sensors and computer to 40059

flmont 10-01-2019 03:59 PM

how about the convertible brackets that move clam shell and the top,.?? Thanks Frank

JustinS 10-01-2019 06:23 PM

Quote:

Originally Posted by Smhube00 (Post 604303)
How much to ship the xenon level sensors and computer to 40059

PM Sent.


Quote:

Originally Posted by flmont (Post 604307)
how about the convertible brackets that move clam shell and the top,.?? Thanks Frank

I am trying to keep those with the frame (I think they are attached). If no one ends up purchasing it in a week, I'll gladly sell them.

tommy583 10-02-2019 06:06 AM

Sent you a PM

KRAM36 10-02-2019 07:48 AM

The Clock spring (tiptronic), what's the condition of it? Are the tabs not broken off and did you tape it off correctly before removing?

JustinS 10-02-2019 03:23 PM

Quote:

Originally Posted by tommy583 (Post 604334)
Sent you a PM

PM Replied to.

Quote:

Originally Posted by KRAM36 (Post 604345)
The Clock spring (tiptronic), what's the condition of it? Are the tabs not broken off and did you tape it off correctly before removing?

It was in good condition, it already sold.

JustinS 10-04-2019 12:05 PM

Bump! Added items, removed items, and marked some as sold.

I'd like to sell the S Brakes, rotors, pads and rear suspension together as a kit. Make me an offer. The calipers have a few marks on them and the clearcoat is starting to show on a few of them. The rotors are within the min wear spec by about 1 MM. The rear pads need to be changed.

john12312 10-06-2019 07:35 PM

Need passenger headlight assembly for 2002 boxster s
 
Do you have one?

JustinS 10-08-2019 05:34 AM

Quote:

Originally Posted by john12312 (Post 604587)
Do you have one?

I'm sorry, I don't. I sold the driver/passenger headlights for $150 for the pair shipped.

Vza 10-11-2019 07:51 PM

Hi, Engine under carriage cover. Furthest to rear PN#986-504-119-00

Thanks V

JustinS 10-12-2019 05:37 PM

Quote:

Originally Posted by Vza (Post 604892)
Hi, Engine under carriage cover. Furthest to rear PN#986-504-119-00

Thanks V

I’m sorry, I do not have the lower covers.


All times are GMT -8. The time now is 01:40 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website