Just pulled a 2.7L engine out of a 2002 silver base. Excellent condition with 75.4K miles. Appears that a new IMS and clutch were installed prior to the immobilizer getting wet. Leak down performed on the engine, 3.5-5% depending on cylinder.

$2,600 + shipping. I am based in Tulsa, OK.

What are the seats like?

Have to fit 2000 S has Savannah color now... Looking to upgrade what I have.

I currently do not have a good set in Savannah. I have a set in black, blue, red, and grey. I'll check out two of my S models that are running and see if I'm willing to part with those. Are you looking for Savannah or any interest in changing colors?

Hi, Need blue r front fender 99 boxster. thanks,vince

Hi Vince, have the fender but it will most likely need to be painted. $200 plus shipping on the fender. Should be able to ship greyhound so wouldn't be too crazy expensive.

http://986forum.com/forums/uploads02...1555268458.jpg

Looking for a passenger side headlight. Mine has a burnt lense.

Looking for good 03/04 top and frame in black to fit my 2000S

Have the headlight. Shoot me a text - 720-645-4071

Do not have an 03/04 top. Have earlier year top with glass.

What do you have for rear wheels available 17" or 18"

Thanks

At this time I would prefer to sell all my wheels as a set but I have 17" turbo twist and 18" twist. I also have a set of 18" black BBS rims with a red striping. See attached. Message me at 720-645-4071 for pictures of bbs. It won't let me upload pictures.



http://986forum.com/forums/uploads02...1555816084.jpg
http://986forum.com/forums/uploads02...1555816806.jpg

Boxster exh
 

I have a 99 that I maybe looking for the complete exhaust for, do you have any? Thanks, Larry

Need a right side radiator shroud (99657532200), right side bumper support (99650553600) and the black piece that the rear bumper sheet metal screws are sunk into. Actually probably need everything related to mounting the rear bumper

Not sure if you have it available but i'm looking for all 4 Boxster S struts and an intact Front underbody panel and middle underbody panel. Previous owner slammed this poor thing and im trying to get it back to stock height. Also looking for both front wheel wells. Let me know what you have, thanks!

Do you have any of the undercarriage splash shields available for a 99 base? Looking for the middle 2 pieces. Thanks.

sway bars
 

need rear sway bar mo30 or 19.8 mm

17x 8 1/2 wheels
 

Hi there, wanted to see if you possibly have 2 of the 17x8 1/2” wheels pictured below? Wanting to run a square setup for the track.

OR

If you have a set of 4 of 17x8 1/2”?

Open on style.

Thanks!
http://986forum.com/forums/uploads02...1558040298.jpg

Time
 

All,

I apologize for not responding in a more timely manner. I have finished moving shops and am more available now. I will get responses back to below requests over the weekend. Again, a more efficient way to contact me is to text 720-645-4071/email porsche986parts@gmail.com

Thank you!

David

Should have all pieces required. Shoot me a text or email and I can get shipped out this week. 720-645-4071 - porsche986parts@gmail.com

Thank you

Do not have any 17" currently. Will respond back to your email also.

Will check but typically these are trashed by the time I get the cars.

$75 per wheel well - In Stock
S Struts you emailed about - should have those in a couple weeks
Will check on underbody panels but as stated they're usually trashed by the time I get them.

Have a complete exhaust and also have a nice stainless setup. Appears to be a Borla exhaust system to bolt up to cats.

2.7L Engine Great Condition
 

Engine still available if anyone is in need. Can get pictures for this.

David

You wouldn't happen to have an engine harness for an 00 S, P/N 986.607.010.05?

Hello I am looking for a shift knob and boot in near perfect condition. My interior is black.....2001 base. My current knob is black and silver.

looking for a starter for my 2001 base

looking for the plexi windscreen between the seats in very good condition.

looking for seat belt clips that hold them to the seats for easier retrieval

looking for black ash trey cover in near perfect condition...mine is very scratched.

Thank you

At this time I do not have this. Usually the engine harness will go with the engine

Looks like I have all pieces. Please send me a message at 720-645-4071 or porsche986parts@gmail.com. Currently don't have my laptop and pictures dont upload well from phone to this site.

Good morning David,
I'm looking for a couple items.
#1 R/H dash vent assy, in black.
#2 CDC-220 6 CD changer cartridge.
I have a 99 base model.

Thanks, Steve

I need the double cup holder that was used in the 2002 986. Black.

Steve, have available. Plesse shoot me a text at 720-645-4071 or PM me here. If pics needed, text is much easier.

Anker - is this at the top of the center console area, or towards the bottom. One is two cupholders split in two, one is a single with a slide to make double. All depends on options included with car.

Thank you!

It's the first one with two independent cup holderts that pop out when you push on them.

Thanks/Anker

DM'd you. Let me know!

I'm looking for the cover to the cabin air filter box if you have one.

Have it, 35 shipped to you

Please set me your info and I will Paypal you.

Vince

Porsche986parts@gmail.com is paypal info. Please ensure the correct shipping info in sent also.

Thank you!

Payment sent 7/17 1:12 PM

Vince

Received, will ship in next couple days. Thank you!

I wanted to make a quick post here about my interactions with David. I bought a LARGE ticket 986 item from him in March that turned out to not be usable.

Long story short, David stood behind the deal and refunded my money in full. He is a stand-up guy and I would not hesitate to purchase from him again.

Thanks and Kudos to you, Dave.

Do you have an ECU for a 2002 Boxster S ? The one in the rear trunk , I'm chasing a weird idle issue that may be computer related . Thanks

Thank you sir!! Appreciate the feedback and look forward to working with you on additional parts when you need them.