Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster & Cayman Detailing Discussion

Post Reply
 
LinkBack Thread Tools Display Modes
Old 05-06-2015, 06:28 AM   #1
Registered User
 
mountainman's Avatar
 
Join Date: Jun 2012
Location: Little Switzerland, north carolina
Posts: 551
Garage
wheel cleaning

Anyone found a product that will clean the residue from the stick on weights from the wheels. I have not found anything that will desolve it and scrubbing and scraping ruins the finish on the wheels.

mountainman is offline   Reply With Quote
Old 05-06-2015, 07:12 AM   #2
Yeah, I've done that.
 
leftfield6's Avatar
 
Join Date: Aug 2014
Location: Atlanta GA
Posts: 91
Garage
Goo Gone and a plastic scraper.




__________________
1999 Boxster, Tiptronic, Hard Top, Arctic Silver with Boxster Red Interior
leftfield6 is offline   Reply With Quote
Old 05-06-2015, 07:24 AM   #3
Registered User
 
Perfectlap's Avatar
 
Join Date: Nov 2004
Location: New Jersey
Posts: 8,709
Meguiars sells a very potent wheel cleaner under their pro-line. You would have to order it online. And its not for amateurs, you have follow the instructions to the T.
But first I would give the guys at Autogeek.net or chemicalguys.com a call for a less invasive route to get rid of adhesive.
__________________
GT3 Recaro Seats - Boxster Red
GT3 Aero / Carrera 18" 5 spoke / Potenza RE-11
Fabspeed Headers & Noise Maker
BORN: March 2000 - FINLAND
IMS#1 REPLACED: April 2010 - NEW JERSEY -- LNE DUAL ROW
Perfectlap is offline   Reply With Quote
Old 05-06-2015, 08:08 AM   #4
Registered User
 
lkchris's Avatar
 
Join Date: Jan 2014
Location: Albuquerque, NM, USA
Posts: 730
__________________
Kent Christensen
Albuquerque
2001 Boxster
2007 GL320 CDI, 2010 CL550
2 BMW motorcycles
lkchris is offline   Reply With Quote
Old 05-06-2015, 10:42 AM   #5
Registered User
 
Join Date: Apr 2008
Location: Southern New jersey
Posts: 1,054
On my race car I end up using WD40 or similar, it seems to work about as good as anything else.
stephen wilson is offline   Reply With Quote
Old 05-06-2015, 06:24 PM   #6
Registered User
 
Jager's Avatar
 
Join Date: Jul 2010
Location: California
Posts: 1,859
Garage
Quote:
Originally Posted by Perfectlap View Post
Meguiars sells a very potent wheel cleaner under their pro-line. You would have to order it online. And its not for amateurs, you have follow the instructions to the T.
But first I would give the guys at Autogeek.net or chemicalguys.com a call for a less invasive route to get rid of adhesive.
Are you referring to this stuff?



Use protective gloves!
__________________
Jäger

300K Mile Club
Jager is offline   Reply With Quote
Old 05-06-2015, 07:58 PM   #7
Certified Boxster Addict
 
Join Date: Nov 2010
Location: Los Angeles
Posts: 7,669
Quote:
Originally Posted by leftfield6 View Post
Goo Gone and a plastic scraper.
+1. I use this stuff too. Works great.
__________________
1999 996 C2 - sold - bought back - sold for more
1997 Spec Boxster BSR #254
1979 911 SC
POC Licensed DE/TT Instructor
thstone is offline   Reply With Quote
Old 05-07-2015, 05:27 AM   #8
Registered User
 
Ckrikos's Avatar
 
Join Date: Sep 2002
Location: Northern NJ
Posts: 633
Goof off worked for me.
__________________
LB/GG/MB 02 2.7 sold
MB/GG 02 996TT
Ckrikos is offline   Reply With Quote
Old 05-07-2015, 06:24 AM   #9
Registered User
 
Join Date: Nov 2009
Location: Winnipeg MB
Posts: 2,486
Brake cleaner. I put that **** on everything!
__________________
'99 black 986
Mark_T is offline   Reply With Quote
Old 05-07-2015, 08:57 PM   #10
Registered User
 
Join Date: May 2015
Location: Greater Seattle, WA
Posts: 534
Assuming you have painted wheels (not chrome plated), mineral spirits (also known as paint thinner) works and is fairly gentle, or toluene if you have some and want it work a little faster. The other products here are probably also good (like the 3m adhesive remover - naphtha and xylene or other not instantly evaporating hydrocarbon solvents), but I advise against using brake parts cleaner, lacquer thinner, or anything with acetone - this is too aggressive for the paint that's on the wheel (will eat and etch, and abrade away the surface of the paint).

The "wheel brightener" (with some nasty acid of something like hydrofluoric acid, I'm pretty sure) is also not really the right tool for the job for removing adhesive, (or road tar like deposits, for that matter). It works great for cleaning baked/caked on brake dust though, and is the only thing out that that can really remove aluminum oxide deposits in the pockets of the wheel where there is no finish at all (or in the locations where the finish has been pitted or chipped with dirty looking surface oxides).

Where you just have caked on brake dust over painted surface, there are gentle on the finish (but expensive) wheel cleaning products that work nearly as good as the acid or caustic based cleaners. (Example: Sonax wheel cleaner plus) These generally turn purple after exposure to brake dust or other iron deposit. The do not remove aluminum oxide deposit from the unfinished or chipped areas like the hydrofluoric cleaners do.

The combination of a hydrofluoric cleaner and a solvent (not at the same time necessarily, but alternating), will give amazing results, but the acid may etch or damage the paint a bit (recommend not letting it dwell on paint any longer than needed, and doing it only very infrequently.

The acid cleaners should kept away from the brake components. This means emoving wheel from car. Be sure to not let the outer surface of the wheel fall on the ground when cleaning the wheel off the car!

If you do thoroughly clean your wheels, apply a sealer to make them easier to keep clean in the future. I also tried polishing the inner barrels of the one of the 18" turbo-look wheels (pictured below) I cleaned on my 986, and it was such a noticeable improvement that I will definitely be doing the rest the exact same way. Multiple applications of th cleaning products, manual agitation, and persistence is required - there is no "quick fix" to cleaning wheels that are really dirty without damaging the finish.




Last edited by jakeru; 05-07-2015 at 09:05 PM.
jakeru is offline   Reply With Quote
Old 05-07-2015, 10:45 PM   #11
Registered User
 
Join Date: Apr 2015
Location: SC
Posts: 33
I like using Sonax because it can remove the grime and brake dust without scrubbing too hard.
fredd5r is offline   Reply With Quote
Old 05-08-2015, 05:52 AM   #12
On the slippery slope
 
JayG's Avatar
 
Join Date: Mar 2014
Location: Austin and Palm Springs
Posts: 3,793
Garage
after they are clean, apply Rejex. Makes them a lot easier to clean later
__________________
2004 Boxster S 6 speed - DRL relay hack, Polaris AutoTop DIY
2004 996 Targa Tip
Instructor - San Diego region
2014 Porsche Performance Driving School
2020 BMW X3, 2013 Ram 1500, 2016 Cmax, 2004 F-150 "Big Red"
JayG is offline   Reply With Quote
Old 05-08-2015, 08:05 AM   #13
Registered User
 
Perfectlap's Avatar
 
Join Date: Nov 2004
Location: New Jersey
Posts: 8,709
Yes, that might be the only detailing product I've seen that says Danger! on the front of the label.
Many bad things would happen if they sold over the counter at your local Pep Boys.
Darwin at work..

Quote:
Originally Posted by Jager View Post
Are you referring to this stuff?



Use protective gloves!
__________________
GT3 Recaro Seats - Boxster Red
GT3 Aero / Carrera 18" 5 spoke / Potenza RE-11
Fabspeed Headers & Noise Maker
BORN: March 2000 - FINLAND
IMS#1 REPLACED: April 2010 - NEW JERSEY -- LNE DUAL ROW
Perfectlap is offline   Reply With Quote
Old 05-08-2015, 08:13 AM   #14
Registered User
 
Perfectlap's Avatar
 
Join Date: Nov 2004
Location: New Jersey
Posts: 8,709
Quote:
Originally Posted by jakeru View Post
Where you just have caked on brake dust over painted surface, there are gentle on the finish (but expensive) wheel cleaning products that work nearly as good as the acid or caustic based cleaners. (Example: Sonax wheel cleaner plus) These generally turn purple after exposure to brake dust or other iron deposit. The do not remove aluminum oxide deposit from the unfinished or chipped areas like the hydrofluoric cleaners do.


The acid cleaners should kept away from the brake components. This means emoving wheel from car.
Very true you should work your way up the bite chart before going to the acidic option.
Which is what I presume the OP has done.
And definitely remove the wheels.
Those are excellent results you posted.
__________________
GT3 Recaro Seats - Boxster Red
GT3 Aero / Carrera 18" 5 spoke / Potenza RE-11
Fabspeed Headers & Noise Maker
BORN: March 2000 - FINLAND
IMS#1 REPLACED: April 2010 - NEW JERSEY -- LNE DUAL ROW
Perfectlap is offline   Reply With Quote
Old 05-25-2015, 12:31 PM   #15
Registered User
 
Join Date: May 2015
Location: Greater Seattle, WA
Posts: 534
Quote:
Originally Posted by Perfectlap View Post
Very true you should work your way up the bite chart before going to the acidic option.
Which is what I presume the OP has done.
And definitely remove the wheels.
Those are excellent results you posted.
Thanks! I refined my thorough wheel cleaning technique on two other cars before I started tackling the 18" turbo-looks. (Lots of time into it.)

Biggest mistake/lesson I learned: be very careful when handling a removed wheel to not let it fall on its face, (which can damage the wheel)! The wider Porsche wheels are more stable than most.

Quote:
Originally Posted by Perfectlap View Post
Yes, that might be the only detailing product I've seen that says Danger! on the front of the label.
Many bad things would happen if they sold over the counter at your local Pep Boys.
Darwin at work..
Wheel cleaners with hydrofluoric actually are available over the counter. I got mine (Eagle One Mag Wheel cleaner) from the local O'Reiley auto parts store. (I presume it's basically equivalent to the meguiars product.) Reason I originally my hydrofluoric cleaner was not to clean wheels, but to remove aluminum oxides for preparing dirty aluminum parts for TIG welding.
jakeru is offline   Reply With Quote
Old 05-25-2015, 06:36 PM   #17
Registered User
 
Pdwight's Avatar
 
Join Date: May 2013
Location: North Alabama
Posts: 2,079
tag

following this
Pdwight is offline   Reply With Quote
Old 05-26-2015, 06:35 AM   #18
Registered User
 
mikesz's Avatar
 
Join Date: Feb 2013
Location: Cranston RI
Posts: 902
Garage
I found the orange hand cleaner to work the best got most of the dirt and grime off then I wet sanded. 400,800,1500,2000. I then used polishing kit from Eastwood.
__________________
99 Porsche Boxster
mikesz is offline   Reply With Quote
Old 05-26-2015, 09:16 AM   #19
Registered User
 
Pdwight's Avatar
 
Join Date: May 2013
Location: North Alabama
Posts: 2,079
wet sanding

I have never done this, tell me more about the techniques please
Pdwight is offline   Reply With Quote
Old 05-26-2015, 09:43 AM   #20
Registered User
 
Join Date: Jul 2009
Location: Arlington Heights, IL
Posts: 1,561
Quote:
Originally Posted by mountainman View Post
anyone found a product that will clean the residue from the stick on weights from the wheels. I have not found anything that will desolve it and scrubbing and scraping ruins the finish on the wheels.
wd-40.....

Flavor 987S is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 08:26 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page