Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Show and Tell Gallery

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-02-2019, 01:52 PM   #11
2003 Base 5-speed
 
grc0456's Avatar
 
Join Date: Jul 2015
Location: Stoneham, MA
Posts: 949
Garage
Quote:
Originally Posted by Tomikaze View Post
While the car was in storage this winter I took the seats and seat belts out. Should have taken some before photos but I didn't. My graphite gray leather wasn't too bad. The drivers seat bolster had signs of wear. No cracks in the leather itself but cracks in the dye covering it. So do I risk dyeing the entire seat so it all matches or just that bolster? Will it fill the cracks? Will it look OK? Pondered these questions for a while and then settled on Color Plus. Explained the seat wasn't too bad and made some suggestions for me. Anyone with Graphite Gray knows these seats show the dirt pretty easy. First step was a citrus based cleaned that was SUPER concentrated. Did a great job cleaning the leather. They actually looked a shade brighter after this step. Next was the conditioner. Then the dye. Started on the inter portion of the seat bottom so in case it looked horrible I would stop. To my surprise... one light coat of this dye and IT LOOKED NEW. Had it color matched to a piece of leather off my dash so the dye actually brightened up the seat and I swear it looks like factory fresh leather now. The photos don't do justice. Ended up doing the entire seat. It blends very nice. No swirl marks. I put it on with a micro fiber cloth. The one bolster that had wear looked almost perfect just wiping one light coat of dye over it. Very happy I took the plunge. The seat on the left is the finished seat. The one on the right is untouched. Last step is to rub it down with a microfiber cloth and it will remove some of the sheen. haven't done that yet. You can see the right seat is a shade or two yellower (dirtier)





Looks great! I also used the Color-Plus products on my ‘03 with great results. I had previously used a competitor’s products, which looked great initially, but didn’t hold up. The key to the Color-Plus (beyond following the instructions faithfully) is the conditioner - apply it liberally, let soak overnight, and dry thoroughly before applying colorant.


Sent from my iPad using Tapatalk
grc0456 is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 11:33 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page