Go Back   986 Forum - for Porsche Boxster & Cayman Owners > Search Forums

Showing results 1 to 25 of 41
Search took 0.04 seconds.
Search: Posts Made By: since95
Forum: Performance and Technical chat 02-17-2019, 12:40 PM
Replies: 14
Views: 707
Posted By since95
I rebuild my m96 due to either stretched rod bolt...

I rebuild my m96 due to either stretched rod bolt or oil starvation. I basically seized 1 rod on the crank. When I rebuilt my motor I re-used the oil cooler. When I did my inital startup and run...
Forum: Performance and Technical chat 02-11-2019, 09:25 AM
Replies: 4
Views: 462
Posted By since95
Thanks for the help. one of the other things I...

Thanks for the help. one of the other things I have found is the outlet I need to make some kind of a bend for is not located in the same spot as the original - so I will need to locate the MAOS and...
Forum: Performance and Technical chat 02-11-2019, 05:13 AM
Replies: 4
Views: 462
Posted By since95
motorsport AOS install

Just wondering if anyone has any insight into a 996 motorsport AOS installation into a 2000S. I know it is going to need a bit of fabrication to mount it, but what do you do with the 80 degree bend...
Forum: Boxster General Discussions 01-29-2019, 03:34 PM
Replies: 15
Views: 1,123
Posted By since95
I bought a southern car that was highly sun...

I bought a southern car that was highly sun damaged. I used Vvivid vinyl I found on Amazon. Interior parts were pretty easy. Leather work wasnt bad, except for steering...
Forum: Boxster General Discussions 01-10-2019, 08:34 AM
Replies: 45
Views: 2,254
Posted By since95
Speed yellow boxster Giallo Midas Gallardo ...

Speed yellow boxster
Giallo Midas Gallardo
Gulf Interseries Cayman

All properly made mid enginehttps://uploads.tapatalk-cdn.com/20190110/bf61e2b05e758686156c9e39088ec46c.jpg

Sent from my...
Forum: Boxster General Discussions 01-09-2019, 06:55 AM
Replies: 45
Views: 2,254
Posted By since95
Giallo Midas - Pearl Yellow - it is really...

Giallo Midas - Pearl Yellow - it is really stunning
Forum: Boxster General Discussions 01-09-2019, 06:16 AM
Replies: 45
Views: 2,254
Posted By since95
The other car in my garage is an 06 Gallardo. I...

The other car in my garage is an 06 Gallardo. I had 4 911 all air cooled. when it came time to hit the track I chose to buy a 986 - simply put mid engine and bang for the buck. Mid engine is...
Forum: Performance and Technical chat 11-20-2018, 05:05 AM
Replies: 34
Views: 2,425
Posted By since95
Following this - I have the same issue on my...

Following this - I have the same issue on my 2000S. I rebuilt the motor and it started after rebuild - right around 2500 RPM. I have all new chains/guide rails/vario ramps. I have 5 months of...
Forum: Boxster General Discussions 11-20-2018, 04:41 AM
Replies: 10
Views: 825
Posted By since95
I made this from scratch - hollow carbon skin -...

I made this from scratch - hollow carbon skin - uprights - end plates. My advice - buy one instead!

http://986forum.com/forums/uploads02/20180421_1711211542721304.jpg
Forum: Performance and Technical chat 08-04-2018, 11:51 AM
Replies: 5
Views: 511
Posted By since95
I removed the oil pressure light sending unit and...

I removed the oil pressure light sending unit and plugged a mechanical gauge into the port.

Sent from my SM-J700P using Tapatalk
Forum: Performance and Technical chat 08-04-2018, 11:16 AM
Replies: 5
Views: 511
Posted By since95
Napa 1042 that came with the kit Sent from...

Napa 1042 that came with the kit

Sent from my SM-J700P using Tapatalk
Forum: Performance and Technical chat 08-04-2018, 09:41 AM
Replies: 5
Views: 511
Posted By since95
spin on filter

I recently rebuilt my 2000S engine. I added a couple of upgrades from LN, the Bilt Racing 2QT deep sump with baffles, and the spin on oil filter. When I first started the engine the oil pressure...
Forum: Performance and Technical chat 07-28-2018, 01:50 AM
Replies: 6
Views: 822
Posted By since95
And to better answer your question now, the...

And to better answer your question now, the tensioners are part off the variocam system which alters the cam timing at I believe 3500 rpm. Since the ramps are so chewed up and worn the cams have...
Forum: Performance and Technical chat 07-28-2018, 01:38 AM
Replies: 6
Views: 822
Posted By since95
I am pretty sure a main cause of the deviation...

I am pretty sure a main cause of the deviation comes from the cam tensioner pads that wear out for the timing chain between the camshafts. My deviations were 6 and 9 rock steady. When I pulled...
Forum: Performance and Technical chat 07-24-2018, 09:50 AM
Replies: 11
Views: 816
Posted By since95
I just did mine on Saturday. Engine out during a...

I just did mine on Saturday. Engine out during a full rebuild due to a seized rod bearing. Make sure when you remove the valve covers to use the holding tool on the back side of the camshafts. ...
Forum: Boxster General Discussions 07-09-2018, 08:10 AM
Replies: 9
Views: 705
Posted By since95
So I haven't had time to get back to my engine...

So I haven't had time to get back to my engine since I was on vaca the past week, but looking at the JFP link the 2 drive "sprockets" in the illustration look very different. One company had them...
Forum: Boxster General Discussions 07-01-2018, 05:37 AM
Replies: 9
Views: 705
Posted By since95
Thanks, I found this after I ordered the crank. ...

Thanks, I found this after I ordered the crank. Still thought the crank was a way less expensive option until now at least.

I am sure based of what JFP said I mixed the chain types. I guess...
Forum: Boxster General Discussions 06-30-2018, 07:59 AM
Replies: 9
Views: 705
Posted By since95
Crank came from a donor motor. Seized a rod...

Crank came from a donor motor. Seized a rod bearing due to oil starvation on track. So my crank has am over heated rod journal. I was told it was fine but needed to be ground to make sure it was...
Forum: Boxster General Discussions 06-30-2018, 05:26 AM
Replies: 9
Views: 705
Posted By since95
IMS shaft not aligning to case bore 2000S

I'm in the process of rebuilding my 2000S motor. I installed the crank carrier but the intermediate shaft is not lining up with the case bore. It's like the timing chain is a link or 2 too short....
Forum: Boxster General Discussions 06-20-2018, 09:18 AM
Replies: 17
Views: 641
Posted By since95
I own a 2000S, and a 2011 Cayman. Can't compare...

I own a 2000S, and a 2011 Cayman. Can't compare the 2 since the 2000S is a street car, and the 2011 Cayman S is a fully caged race car. My 2000S needed some work when I bought her, but I paid $7k...
Forum: Boxster General Discussions 05-31-2018, 04:50 AM
Replies: 10
Views: 765
Posted By since95
So are you saying you have a used or polished...

So are you saying you have a used or polished crank in your car? I tried to read up on what I could do to salvage my crank, and what I found was only a few people had luck welding and re-grinding,...
Forum: Boxster General Discussions 05-30-2018, 03:45 PM
Replies: 10
Views: 765
Posted By since95
I just ordered up first round of parts. Came in...

I just ordered up first round of parts. Came in at $3k plus I am also installing the LNE spin on filter and 2 Qt deep sump which ran another $1k. The used crank was $900 (included in the $3k), I...
Forum: Boxster General Discussions 05-30-2018, 10:25 AM
Replies: 10
Views: 765
Posted By since95
rebuild or replace engine?

Spun a rod bearing on a 2000 S while on the track last week. damage turned out to be rather minimal, limited to one crank journal and the single rod. Race engine builder told me crank would be...
Forum: Boxster General Discussions 05-30-2018, 09:02 AM
Replies: 16
Views: 500
Posted By since95
Too funny! did mine this spring said the same...

Too funny! did mine this spring said the same thing, just didn't post it!
Forum: Performance and Technical chat 05-15-2018, 10:05 AM
Replies: 1
Views: 739
Posted By since95
Just went through the fuel smell thing. you are...

Just went through the fuel smell thing. you are getting an evap error where I did not. Mine turned out simple, although it was the last place I looked - gas cap seal was deteriorated and partially...
Showing results 1 to 25 of 41

 
Forum Jump


All times are GMT -8. The time now is 12:00 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page