Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

Post Reply
 
LinkBack Thread Tools Display Modes
Old 11-03-2006, 06:25 AM   #1
Registered User
 
edevlin's Avatar
 
Join Date: Jul 2006
Location: Virginia
Posts: 916
Local Non-Porsche Mechanics

We have a small local shop here in Farmville, Va that has been doing our family cars for years. Great guys, but new to working on Porsches. The first one they ever worked on was my Boxster a couple of months ago. They installed new front rotors as well as pads on all four wheels. I brought the pads and rotors to the shop. The total cost for the installation, 50.00. These are the guys that I would like to tackle the clutch job.

I am still waiting for some horror stories (real experiences please) to scare me off about getting a lightweight flywheel when the clutch goes in. Its a great Friday here in Central Virginia, and the weather looks like it will be good again tomorrow. I think Cyndy and I are going to drive to Richmond for the monthly First Settlers regional PCA "Porsches and Pancakes" meeting at the Bakers Curst at Short Pump. I have never been to one, but they have them the first Saturday of every month, should be fun,

Ed

:dance: :dance: :dance:
__________________
My Car Webpage

2000 2.7L Boxster 102K; TTP intake, headers, high-flow cats; Dansk high-flow muffler; Autothority ECU chip; TechnoTorque 2; Bilstein coilovers; Racing Dynamics strut brace; stress-bar suspension kit; Aasco lightweight flywheel, B&M short shiftkit; 18" wheels; spare tire delete; OEM GT3 seats; JL audio speakers and subwoofer; Alpine PDX-5/PDX-2 amps; Kenwood DNX8120 CD/DVD/Nav; litronics, deambered
edevlin is offline   Reply With Quote
Old 11-03-2006, 07:45 AM   #2
Registered User
 
deliriousga's Avatar
 
Join Date: Jun 2005
Location: USA!!
Posts: 1,159
If you're going to pay to have it done, don't use anyone but a Porsche mechanic. Preferably an independent shop with Porsche trained specialists. My mechanic for the Dodge will not even look at my Porsches because he says they are a different beast, and he's right.

As for the lightweight flywheel, it's a great thing if you know what you're getting into. Your starts will be quick, but the stress on the drive shaft is increased so you need a clutch plate with springs to absorb some of the stress the dual mass flywheel used to absorb. Also, when you're driving slowly in traffic, you will jerk around a good bit so be ready for it. Personally, after researching the lightweights, I'd only look at flywheel replacement if the old one is bad.

Good luck!
__________________
1987 928S4 Silver Metallic (980)/Navy (TP) 5-Speed
2000 Boxster Speed Yellow/Black 5-Speed
1966 Wife White/Brown Top
1986 Daughter White/Brown Top (Sold!)
1992 Daughter White/Blonde Top
deliriousga is offline   Reply With Quote
Old 11-03-2006, 08:33 AM   #3
Registered User
 
edevlin's Avatar
 
Join Date: Jul 2006
Location: Virginia
Posts: 916
LIghtweight Flywheels

"As for the lightweight flywheel, it's a great thing if you know what you're getting into. Your starts will be quick, but the stress on the drive shaft is increased so you need a clutch plate with springs to absorb some of the stress the dual mass flywheel used to absorb. Also, when you're driving slowly in traffic, you will jerk around a good bit so be ready for it. Personally, after researching the lightweights, I'd only look at flywheel replacement if the old one is bad."

Thanks for the feedback John, that is just the sort of thing I was wondering about.

Ed

__________________
My Car Webpage

2000 2.7L Boxster 102K; TTP intake, headers, high-flow cats; Dansk high-flow muffler; Autothority ECU chip; TechnoTorque 2; Bilstein coilovers; Racing Dynamics strut brace; stress-bar suspension kit; Aasco lightweight flywheel, B&M short shiftkit; 18" wheels; spare tire delete; OEM GT3 seats; JL audio speakers and subwoofer; Alpine PDX-5/PDX-2 amps; Kenwood DNX8120 CD/DVD/Nav; litronics, deambered
edevlin is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 03:38 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page