zenon light system to regular head light conversion
 

I have zenon light system ( converted from regular )

and I need to put my old one for a while.

Is it just plug in? or do i need to do lots of modification?

Different wattages. I think from what Stryke has said, the litronic light system actually run on a smaller wattage than the standard 55W. So if they are litronics, then probably not. if they're just xenon bulbs, perhaps.

Why whould you have to put on the 'old' ones for a while?

If you have the litronic retrofit lights in then you can simply remove them and put the normal halogen lights in. There is a connector to the litronic headlight on the back for the beam rotation that is simply not used.

I'll just post my question here instead of creating another topic: I found this on ebay

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=36476&item=2463689 177

If i get those, will it simply fit in my car with very little work?

For boxster1208 - I assumed you have the Porsche factory lits.

For Alienz the ebay ones do not have the control unit and wiring harness for the control unit. They will work fine without the control unit, you just will not have the beam rotation.

This is what is missing.

http://img15.photobucket.com/albums/...camera_162.jpg

yes i have factory lits.. thanks for info..!!