Tap/Tick noise
Well as it turns out my timing slipped between the cams and crank on bank 1 where most of the noise was coming from. Hope I didn't bend anything up by running it (idled only.with few revs) to add insult to injury I accidentally pushed the cam end plug into the engine. Took the cam cover off(replacing tappets) but didn't find it yet.going to try and get a magnet in there. Any tips? What are the chances I did major damage to the engine. Probably off maybe 20 degrees as a guestamet. thanks v
|
All times are GMT -8. The time now is 08:28 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website