How far can the engine be lowered without disconnecting a lot?
Time has run away and I have to change the cam chain pads before friday. I'm planning to lower the drivetrain as far as it will go without having to drain fluids and disconnect a whole bunch of things.
How far will I be able to lower it without having to disconnect so many things I might as well lowere it completely? |
about 3 inches at the front
|
Yep. If i remember when i replaced the motor mount thats about how much you could drop it. Maybe 4 inches.
|
I would say about 3", I would definitely not go more than 4".
|
Thanks guys. I don't think that will do.
|
It can be done with the engine in the car, I underestimated how long it would take, but I did it once. Just make sure you do one side at a time and set it overlap before removing the cams.
|
Thanks. I dropped the engine, transmission and rear suspension in one go to do it. My main concern with doing it in the car is keaping dirt out of the engine. The space is so tight.
|
Can you pictures and do a quick explanation once you're done?
And tell us how long it took ;) Good luck! |
All times are GMT -8. The time now is 06:55 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website