M030 ROW springs on a base model strut?
I wanted to confirm that the M030 Struts are indeed shorter at the top. I thought I could just buy the M030 ROW springs and use them on my 2002 base bilstein struts and after installing it in my car the springs are just a tad too short when the car is in the air. I'm taking maybe 2 mm too short but still i dont want to risk it.
Alex |
can i just retread the rod all the way down?
|
The springs wont fall out. They might rattle if you are air borne.(which should be never). I wouldn,t worry about it. The shafts are also hardened so you won,t be able to thread them any further.
|
The ROW suspension does lower the car by a little less than an inch all the way around. Don't remember it in mms but maybe that is what you are seeing.
|
the row springs are about 10-20 mm shorter and the corresponding shocks are also about 10 mm shorter. As I said above they won,t fall out even at full droop .Don,t worry about it
|
All times are GMT -8. The time now is 05:48 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website