05 boxster 2.7 will not start
so I pulled the drivers seat out, and the module below the seat out to rescue some jewelry my wife dropped under the seat. Now after putting it back together the car wont even attempt to turn over and has all sorts of error messages on the cluster.
What gives? |
Did you disconnect the battery before you disconnected?
|
What I would do:
Disconnect the battery Take out the seat again Pull everything apart Check to be sure you've accounted for all connections, that they are all fully connected. Check each connector for bent pins or bad connections (trash caught in the connector, etc.) Carefully re-assemble everything looking for any missed connections or mistakes that could have happened the first time though. connect the battery Best of luck! |
I did not disconnect the battery before hand
|
All times are GMT -8. The time now is 06:54 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website