Speed/ABS sensor wiring help
 

Hey guys,
I need some urgent help with the speed/ABS sensor wiring. I bought my car about 70% gutted and I'm trying to piece everything together. The rear wheels have both the pad wear and speed/abs sensors, but no wiring to hook them up to. Do they plug straight into a harness or is there a intermediate piece that they plug into? At this point I have no idea where the sensor wire is routed or where it plugs in. I sure hope the previous owner didn't cut these off.


Is that unplugged hole in the image below where the sensor wiring used to run?


Also, there's a 2 pin connector on the 6 speed tranny. Is this a speed sensor as well? I couldn't find any information on it online.

Thanks,

Vlad

You would probably be better off searching some junkyards for the harness segments you need as they are wildly priced from Porsche (around $1500 just for the main tunnel harness section).

Do all boxsters have abs? I could swear a couple of my past boxsters did not.

Sent from my SM-T310 using Tapatalk

What is this 2 pin connector on the tranny? Is it a reverse light switch? Sorry about the size, I'm using my phone.