Starter ring gear sticking on my 987.1
Have approx 65k on my 2006 S and noticed lately the when starting the squeel when starting,the ring gear is slow to return and sticks for a moment,it s not every time but more and more.Can the starter be fixed,or can i pull it and clean and lube or does it need a new spring,otherwise it starts the car fine,so if i dont need a new starter i would prefer to fix.Anyone had this issue and found a fix thx warren
|
The starter's Bendix drive needs to be cleaned and lubricated, then the noise will go away.
|
JFP,thx,i can get the unit out but does the starter have to come apart to clean and lube it if so is it pretty basic or is there some tech tips to getting it apart and back together,thx
|
Also any special lube,grease or light weight oil preferred?
|
Quote:
|
Great info,thx
|
I dismantled my starter, cleaned all the gears, re-greased it and put it back in. Not a difficult job. Works just fine now!
|
May be a dump question but do i just disconnect the neg or does the positive battery terminal require disconnecting also.When reinstalling will the 06 987 models require a radio code or any special set up for fuel memory ect.thx
|
All times are GMT -8. The time now is 04:40 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website