1st m96.3 rebuild I have just one question...?

[Maxtegroom]

I rebuilt my 1st porsche engine which is this m96 3 chain motor and I started the engine up it runs way way better than when I took it apart but I got code 22 BANK 2 exhaust can over retarded... My observation is that when the crank pully is pinned at OD... Banks 1&2 ALL the camshaft slots line up at the same time... This this right or do I have to take the bolts out of bank 2 cams spin the crank 360 back to U6 and re time bank 2? It is a verio cam plus engine.. Any help is greatly appreciated

[Jake Raby]

Set cam timing on bank 1 @ TDC, and complete the process. Then, rotate the engine exactly 360 degrees back to TDC, then set the cam timing on bank 2.

Do this in no other way.