Hose Identification
 

noticed today that this hose was broken, I was able to "MacGyver" it, but would like to replace it properly with the OEM part. anyone know what it is called?

http://986forum.com/forums/uploads01...1427855668.jpg

#27 in this diagram.

M96.21/22 Air Injection 00-02 M96.23/24 03-

They show no part # for it or even sell it. Hopefully you got it fixed.

I needed one and found it on eBay.

Standard vacuum hose, if it's that to which you are referring. That's why there is no
part #.
MacGyvering is fine but it means the hose is probably getting brittle and should be replaced at some point to avoid a vacuum leak.

Some of the vacuum hoses are very difficult to access and trace. You could easily do more damage /crate other problems removing things -be careful. I have used 3mm silicone vacuum hose as a repair sleeve over broken vacuum hoses as a temporary fix. Pick a silly bright color so you can see where the repair is and notice if it fails easily. YEMV.

Wrong side of the car. That is the vacuum hose for the fuel pressure regulator. Any appropriately sized vacuum hose will do as a replacement.

I stand corrected. specboxCO is right.