Gauge Panel for dash insert?
 

Looking to add 2 gauges (which I already have 2 1/16"?) for
oil temp and oil pressure for my street/track car.

Was thinking of sacrificing my cubby hole.

Anyone have a source for a precut gauge panel?

thanks,

Mike

Question on AFR/boost gauge setup etc - Page 3 - 6speedonline.com Forums

Like this ?

search ebay for 'DIN gauge panel' - lots out there.

and if you're looking for an excuse to get a 3-gauge version, get a B A T (British American Tansfer) Inc 912-24-14 adaptor - screws in where the transmission drain plug goes and allows you to fit a temperature sensor. now you can monitor tranny and engine oil temps (decide if you need to get coolers or not).

These are pretty cool. This is a great idea!

Pilot Automotive Carbon Fiber DIN Panel PM 2001 | eBay

Keep us posted with what you end up doing!!

who else can post pictures of nice aftermarket gauge installs in their 986? would love to see some other installs!

there's this from autometer:

http://www.summitracing.com/int/parts/atm-20014/overview/model/boxster

or this from pedro:

TechnoGauges

or this guy who put a sport chrono dash pod in his car:

Bold Mod- Custom Sport Chrono Pod with Multi Gauge - 6speedonline.com Forums

I have a BT OBD2 connected to my android head unit. use an app called Torque Pro. I have an '01 and apparently the oil temp is not being read by the PCM, so it doesn't show any data. might be different in other models.
it does do pretty much anything the OBD2 can feed it. vacuum, RPMs, coolant temp, throttle position....

http://986forum.com/forums/uploads01...1400704223.jpg
http://986forum.com/forums/uploads01...1400704235.jpg

you can customize the gauges pretty extensively and there are multiple screens you can swipe through.
I am running this on my stereo, but they have this app (android) and several similar ones for iPhone.
one of the coolest features is that it will automatically calculate your 0-6 times, 40-80 times, 1/4 mile times etc...

Very nice, thanks!!